Prototype of a Public Computer System with Fast Automatic Touchscreen Disinfection by Integrated UVC LEDs and Total Reflection

Public touchscreens, such as those used in automated teller machines or ticket payment systems, which are accessed by different people in a short period of time, could transmit pathogens and thus spread infections. Therefore, the aim of this study was to develop and test a prototype of a touchscreen system for the public sector that disinfects itself quickly and automatically between two users without harming any humans. A quartz pane was installed in front of a commercial 19” monitor, into which 120 UVC LEDs emitted laterally. The quartz plate acted as a light guide and irradiated microorganisms on its surface, but—due to total reflection—not the user in front of the screen. A near-infrared commercial touch frame was installed to recognize touch. The antibacterial effect was tested through intentional staphylococcus contamination. The prototype, composed of a Raspberry Pi microcomputer with a display, a touchscreen, and a touch frame, was developed, and a simple game was programmed that briefly switched on the UVC LEDs between two users. The antimicrobial effect was so strong that 1% of the maximum UVC LED current was sufficient for a 99.9% staphylococcus reduction within 25 s. At 17.5% of the maximum current, no bacteria were observed after 5 s. The residual UVC irradiance at a distance of 100 mm in front of the screen was only 0.18 and 2.8 µW/cm2 for the two currents, respectively. This would allow users to stay in front of the system for 287 or 18 min, even if the LEDs were to emit UVC continuously and not be turned off after a few seconds as in the presented device. Therefore, fast, automatic touchscreen disinfection with UVC LEDs is already possible today, and with higher currents, disinfection durations below 1 s seems to be feasible, while the light guide approach virtually prevents the direct irradiation of the human user.