Burr to Bone Time for Joint Preparation in Minimally Invasive Foot and Ankle Fusion Surgeries: A Cadaver Study

Category: Ankle; Midfoot/Forefoot Introduction/Purpose: Minimally invasive surgical (MIS) techniques have been implemented in various foot and ankle procedures, including joint arthrodesis. While these techniques can be effective in reducing complications and improving outcomes, there remains variability with surgeon learning curves, the type of instruments used, and approach to intraoperative imaging. This study seeks to aid surgeons through more reproducible guidelines by measuring the time needed for joint preparation with an MIS specific burr. Methods: A total of 8 cadaveric limbs (4 left and 4 right feet) were used for the preparation of the 1st metatarsophalangeal (MTP), 1st tarsometatarsal (TMT), talonavicular (TN), subtalar and ankle joints. The active burr use time to debride all cartilage from each joint was recorded. Each joint was prepared with an open approach to precisely determine the amount of time needed for cartilage removal. Descriptive statistics and a Kruskal-Wallis with post-hoc comparisons were used to analyze the data. Results: The 1st MTP was prepared with a mean (SD) time of 54.49 (34.65) seconds; the 1st TMT 51.82 (19.69) seconds; the TN joint 87.89 (43.77) seconds; the subtalar joint 59.46 (37.84) seconds; and the ankle joint 95.59 (54.99) seconds. Only the ankle joint preparation times compared with 1st MTP, 1st TMT and subtalar joints were significantly longer. Conclusion: This study provides burr time metrics for joint debridement in MIS foot and ankle arthrodesis procedures. Although there remains variability in types of burrs used, joint sizes and individual experience with the instruments, the timing of joint preparation can be an objective reference for surgeons to effectively and safely perform minimally invasive techniques. Figure 1. Comparison of joint preparation time across different joints The error bars depict one standard deviation of uncertainty. Asterisk (*) lines indicate a statistically significant difference (P < 0.05) based on unadjusted P values from the Dunn post hoc group comparisons. *Abbreviations: metatarsophalangeal (MTP), tarsometatarsal (TMT), talonavicular (TN).

Authors

Publication Details

Journal
Foot & Ankle Orthopaedics
Published
2024-10-01
DOI
https://doi.org/10.1177/2473011424s00169
Citations
1
Primary Topic
Orthopedic Surgery and Rehabilitation
Type
article
Field-Weighted Citation Impact
0.57
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Burr to Bone Time for Joint Preparation in Minimally Invasive Foot and Ankle Fusion Surgeries: A Cadaver Study

Ettore Vulcano, Maksat Idris, Bonnie Y. Chien
1 citations
Foot & Ankle Orthopaedics
Orthopedic Surgery and Rehabilitation
0.57
article

Burr to Bone Time for Joint Preparation in Minimally Invasive Foot and Ankle Fusion Surgeries: A Cadaver Study

Ettore Vulcano, Maksat Idris, Bonnie Y. Chien
article en
1 citations

Abstract

Category: Ankle; Midfoot/Forefoot Introduction/Purpose: Minimally invasive surgical (MIS) techniques have been implemented in various foot and ankle procedures, including joint arthrodesis. While these techniques can be effective in reducing complications and improving outcomes, there remains variability with surgeon learning curves, the type of instruments used, and approach to intraoperative imaging. This study seeks to aid surgeons through more reproducible guidelines by measuring the time needed for joint preparation with an MIS specific burr. Methods: A total of 8 cadaveric limbs (4 left and 4 right feet) were used for the preparation of the 1st metatarsophalangeal (MTP), 1st tarsometatarsal (TMT), talonavicular (TN), subtalar and ankle joints. The active burr use time to debride all cartilage from each joint was recorded. Each joint was prepared with an open approach to precisely determine the amount of time needed for cartilage removal. Descriptive statistics and a Kruskal-Wallis with post-hoc comparisons were used to analyze the data. Results: The 1st MTP was prepared with a mean (SD) time of 54.49 (34.65) seconds; the 1st TMT 51.82 (19.69) seconds; the TN joint 87.89 (43.77) seconds; the subtalar joint 59.46 (37.84) seconds; and the ankle joint 95.59 (54.99) seconds. Only the ankle joint preparation times compared with 1st MTP, 1st TMT and subtalar joints were significantly longer. Conclusion: This study provides burr time metrics for joint debridement in MIS foot and ankle arthrodesis procedures. Although there remains variability in types of burrs used, joint sizes and individual experience with the instruments, the timing of joint preparation can be an objective reference for surgeons to effectively and safely perform minimally invasive techniques. Figure 1. Comparison of joint preparation time across different joints The error bars depict one standard deviation of uncertainty. Asterisk (*) lines indicate a statistically significant difference (P < 0.05) based on unadjusted P values from the Dunn post hoc group comparisons. *Abbreviations: metatarsophalangeal (MTP), tarsometatarsal (TMT), talonavicular (TN).

Foot & Ankle OrthopaedicsVol. 9(4)
Openalex Percentile: Top 26%
Orthopedic Surgery and Rehabilitation
0.57
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Burr to Bone Time for Joint Preparation in Minimally Invasive Foot and Ankle Fusion Surgeries: A Cadaver Study — Ettore Vulcano, Maksat Idris, et al. · Foot & Ankle Orthopaedics (2024) | TGRS Research Map | TGRS