Development and calibration of a measurement system for the characterization of avalanche photodiodes prospectively used as sensors in X-ray Compton polarimeters for space

Solar flares, dynamic eruptions of electromagnetic radiation from the Sun's surface, represent a potential risk for various human technological infrastructures. The CUbesat Solar Polarimeter (CUSP) project, part of the Alcor Program of the Italian Space Agency, aims to measure solar flare polarization in the hard X-ray band. This paper focuses on the design and setup of a measurement system to characterize the response of the avalanche photodiodes (APD) used in the CUSP polarimeter. The system is tested at room temperature conditions by varying both incident photon energy between 20 keV and 135 keV, using X-ray sources as references, and APD bias voltage from 260 V to 410 V. Using the calibrated system, the dependence of APD gain on bias voltage, and its energy resolution, are measured, matching the metrological standards of the polarimeter.

Authors

Publication Details

Journal
Measurement Sensors
Published
2024-12-21
DOI
https://doi.org/10.1016/j.measen.2024.101423
Primary Topic
Radiation Detection and Scintillator Technologies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Development and calibration of a measurement system for the characterization of avalanche photodiodes prospectively used as sensors in X-ray Compton polarimeters for space

Simone Di Filippo, R. Campana, Pasqualino Loffredo, Enrico Silva et al.
Measurement Sensors
Radiation Detection and Scintillator Technologies
article

Development and calibration of a measurement system for the characterization of avalanche photodiodes prospectively used as sensors in X-ray Compton polarimeters for space

Simone Di Filippo, R. Campana, Pasqualino Loffredo, Enrico Silva, E. Costa, G. De Cesare, P. Soffitta, E. Del Monte, Dario Modenini, Andrea Alimenti, Pierluigi Fanelli, Daniele Brienza, Alfredo Locarini, Andrea Curatolo, Fabio Muleri, G. Lombardi, G. Cucinella, Sergio Fabiani, Alessandro Zambardi, Mauro Centrone, Giuseppe Leccese, Nicolas De Angelis, Ilaria Baffo, Massimo Perelli, I. Donnarumma, Alessandro Di Marco, Sergio Bonomo, Anthony C. Terracciano, Fabrizio Cologgi, Paolo Leonetti, Emanuele Zaccagnino, Andrea Negri, Paolo Tortora, A. Fedele, A. Del Re, Sergio Di Cosimo, G. Minervini, Silvia Natalucci, A. Rubini, Giulia De Iulis
article en

Abstract

Solar flares, dynamic eruptions of electromagnetic radiation from the Sun's surface, represent a potential risk for various human technological infrastructures. The CUbesat Solar Polarimeter (CUSP) project, part of the Alcor Program of the Italian Space Agency, aims to measure solar flare polarization in the hard X-ray band. This paper focuses on the design and setup of a measurement system to characterize the response of the avalanche photodiodes (APD) used in the CUSP polarimeter. The system is tested at room temperature conditions by varying both incident photon energy between 20 keV and 135 keV, using X-ray sources as references, and APD bias voltage from 260 V to 410 V. Using the calibrated system, the dependence of APD gain on bias voltage, and its energy resolution, are measured, matching the metrological standards of the polarimeter.

Measurement SensorsVol. 38
Affordable and clean energy
Openalex Percentile: Top 67%
Radiation Detection and Scintillator Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.