Polydopamine functionalized Ti3C2 MXene hybrid reinforced waterborne epoxy nanocomposites for enhancing anticorrosion coating application

2D MXene can prevent the penetration of corrosive media and can contribute to the improvement of corrosion resistance performance. However, achieving its uniform dispersion in the polymer matrix is challenging due to its large specific surface area and rapid aggregation. In this study, stable dispersion of polydopamine functionalized Ti 3 C 2 MXene (PDA-TM) hybrid in the waterborne epoxy (WEP) matrix was achieved via in-situ polymerization of the PDA layer on the surface of TM. The Fourier-transform infrared (FTIR) spectrum of PDA-TM showed the blue shift of O-H bond at 3438 cm −1 and the Ti-O bond of TM at 612 cm −1 . The characteristic peak of PDA-TM in the XRD pattern appeared at 2θ = 3.9° and the PDA bulge became smaller. Both proved the successful synthesis of PDA and TM. The surface wrinkles of the PDA-TM of SEM became more pronounced, and the smooth surface became rougher. This was due to the in-situ polymerization of DA on the surface of TM, which was conducive to avoid tight stacking of TM and expand its interlayer spacing. In addition, The WEP nanocomposite coating showed high impact resistance, strong adhesion, flexibility, and wear resistance. Moreover, PDA-TM decreased the glass transition temperature of WEP from 128.0 to 95.4 °C and improved the reflection loss for electromagnetic wave absorption properties. Furthermore, the |Z| 0.01Hz value of the PDA-TM 0.5 % (6.072 × 10 5 Ω cm 2 ) coating was approximately 6 times higher compared to that of the WEP coating after 30-d immersion in 3.5 wt% NaCl solution. The friction coefficient was also a quarter of neat WEP. This indicated that embedding a small amount of PDA functionalized TM nanosheets into WEP coating could improve obviously the corrosion resistance and wear resistance properties. The present research will provide a theoretical basis for the use of TM in the field of anticorrosion and electromagnetic wave absorption.

Authors

Institutions

Publication Details

Journal
Ceramics International
Published
2024-12-19
DOI
https://doi.org/10.1016/j.ceramint.2024.12.313
Citations
6
Primary Topic
MXene and MAX Phase Materials
Type
article
Field-Weighted Citation Impact
0.70
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Polydopamine functionalized Ti3C2 MXene hybrid reinforced waterborne epoxy nanocomposites for enhancing anticorrosion coating application

Siyu Hao, Qingsong Zhu, Zeinhom Mohamed El-Bahy, Mohammed A. Amin et al.
6 citations
Ceramics International
MXene and MAX Phase Materials
0.70
article

Polydopamine functionalized Ti3C2 MXene hybrid reinforced waterborne epoxy nanocomposites for enhancing anticorrosion coating application

Siyu Hao, Qingsong Zhu, Zeinhom Mohamed El-Bahy, Mohammed A. Amin, Baoji Miao, Saad Melhi, Zhanhu Guo, Xiao-qin Zha, Xinyu Lei, Ben Bin Xu, Huitan Fu, Juanna Ren
article en
6 citations

Abstract

2D MXene can prevent the penetration of corrosive media and can contribute to the improvement of corrosion resistance performance. However, achieving its uniform dispersion in the polymer matrix is challenging due to its large specific surface area and rapid aggregation. In this study, stable dispersion of polydopamine functionalized Ti 3 C 2 MXene (PDA-TM) hybrid in the waterborne epoxy (WEP) matrix was achieved via in-situ polymerization of the PDA layer on the surface of TM. The Fourier-transform infrared (FTIR) spectrum of PDA-TM showed the blue shift of O-H bond at 3438 cm −1 and the Ti-O bond of TM at 612 cm −1 . The characteristic peak of PDA-TM in the XRD pattern appeared at 2θ = 3.9° and the PDA bulge became smaller. Both proved the successful synthesis of PDA and TM. The surface wrinkles of the PDA-TM of SEM became more pronounced, and the smooth surface became rougher. This was due to the in-situ polymerization of DA on the surface of TM, which was conducive to avoid tight stacking of TM and expand its interlayer spacing. In addition, The WEP nanocomposite coating showed high impact resistance, strong adhesion, flexibility, and wear resistance. Moreover, PDA-TM decreased the glass transition temperature of WEP from 128.0 to 95.4 °C and improved the reflection loss for electromagnetic wave absorption properties. Furthermore, the |Z| 0.01Hz value of the PDA-TM 0.5 % (6.072 × 10 5 Ω cm 2 ) coating was approximately 6 times higher compared to that of the WEP coating after 30-d immersion in 3.5 wt% NaCl solution. The friction coefficient was also a quarter of neat WEP. This indicated that embedding a small amount of PDA functionalized TM nanosheets into WEP coating could improve obviously the corrosion resistance and wear resistance properties. The present research will provide a theoretical basis for the use of TM in the field of anticorrosion and electromagnetic wave absorption.

Ceramics InternationalVol. 51(7)
Taif University (SA), Al-Azhar University (EG), Northumbria University (GB), Henan University of Technology (CN), University of Bisha (SA), China State Shipbuilding (China) (CN), Taiyuan University of Science and Technology (CN)
Clean water and sanitation
Openalex Percentile: Top 29%
MXene and MAX Phase Materials
0.70
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.