Tensile properties and microstructure of AISI 430 ferritic stainless steel welded TIG method
In this study, AISI 430 ferritic stainless steel sheets with dimensions of 200x50x2.5 mm were joined by TIG (Tungsten Inert Gas) methods and the tensile properties and microstructure properties of the joined materials were investigated. In microstructural studies, it was determined that a significant grain coarsening occurred in the heat affected zone (HAZ) AISI 430 ferritic stainless steel. Tensile, yield strength and elongation decreased in these steels after TIG welding process.
Authors
- Adnan Çalık
- N. Uçar (ORCID: https://orcid.org/0000-0002-0936-0382)
- Ahmet Faruk Özdemir (ORCID: https://orcid.org/0000-0001-9879-9209)
Institutions
- Suleyman Demirel University (KZ)
Publication Details
- Journal
- International Journal of Computational and Experimental Science and Engineering
- Published
- 2024-12-18
- DOI
- https://doi.org/10.22399/ijcesen.699
- Citations
- 1
- Primary Topic
- Welding Techniques and Residual Stresses
- Type
- article
- Field-Weighted Citation Impact
- 0.21