Dissipative Soliton Generation on All Normal Dispersion (ANDi) Mode-Locked 1- μm Fiber Laser Using MoS <sub>2</sub> /ZnO Composite on a Side-Polished Fiber
The generation of dissipative soliton has been proven to have a significant impact due to its higher pulse energy than conventional soliton. This report uses a novel 2D material, which is a molybdenum disulfide/zinc oxide (MoS2/ZnO) composite deposited on a side polished optical fiber to produce dissipative soliton mode-locked pulses, having a repetition rate of 28.7 MHz. The optical spectrum has a center wavelength and 3-dB bandwidth of 1028 nm and 3.2 nm, respectively, in a normal net cavity dispersion. The composites provide a better performance when compared with MoS2 alone.
Authors
- Muhamad Zharif Samion (ORCID: https://orcid.org/0000-0003-0848-468X)
- H. Ahmad (ORCID: https://orcid.org/0000-0002-9599-2086)
- Muhammad Khairol Annuar Zaini (ORCID: https://orcid.org/0000-0001-7927-8272)
- Maisarah Lutfi (ORCID: https://orcid.org/0009-0008-4974-3151)
Institutions
- University of Malaya (MY)
Publication Details
- Journal
- IEEE Journal of Quantum Electronics
- Published
- 2024-12-19
- DOI
- https://doi.org/10.1109/jqe.2024.3520411
- Citations
- 4
- Primary Topic
- Advanced Fiber Laser Technologies
- Type
- article
- Field-Weighted Citation Impact
- 1.35
Funders
- Ministry of Higher Education, Malaysia
- Universiti Malaya