Water Redistribution in Vein Quartz Under Progressive Deformation (During Plastic Deformation): μFTIR and EBSD Study (Western Transbaikalia, Russia)

Water distribution in the structure of vein quartz formed as a result of successive plastic deformations associated with dislocation slip and subsequent recrystallization was estimated using infrared microspectroscopic (μFTIR) mapping. Water contained in quartz demonstrates a broad absorption band in the IR range at 2800–3750 cm−1, which indicates its molecular state and suggests the presence of water bearing water inclusions. In addition to water, the presence of an absorption band located at 2341 cm−1 seems to be due to the presence of carbon dioxide in a molecular state. A necessary step before assessing the distribution of volatile components in the quartz structure was to calibrate the boundaries obtained by calculating the intensity ratios of the peaks at 1118 and 1160 cm−1 in the reflectance spectrum and using electron back scatter diffraction (EBSD). A variety of fluid distributions in different elements of the structure was observed. At medium temperatures and medium strain rates, dislocation mass transfer is effective during dislocation slip. At low strain rates and elevated temperatures, the contribution of diffusion creep gradually increases, which facilitates the interaction of volatile components with migrating boundaries. It was found that in the process of successive rearrangements, migration of fluid components occurs within the main elements of the structure due to the redistribution of dislocations between defects of different scale levels. Redistribution of fluid from fluid inclusions as a result of plastic deformations in the quartz structure is one of the ways of relaxing intracrystalline stresses during strengthening of the structure.