2 INFLUENCE OF Fe:W RATIO IN TETRABORATE ELECTROLYTE ON CHARACTERISTICS OF OXIDE LAYERS FORMED ON TITANIUM BY PLASMA ELECTROLYTIC OXIDATION

The effect of the concentration of sodium tungstate in a tetraborate electrolyte containing chelate complexes of Fe (III) with EDTA on the composition, optical and photocatalytic properties of Ti/TiO2-WO3-Fe2(WO4)3 film composites formed by a one-stage method of plasma-electrolytic oxidation was studied. The research showed that sodium tungstate additives contribute to the production of high-quality and continuous PEO coatings. According to X-ray Diffraction Analysis (XRD), all formed coatings contain tungsten oxide WO3 in the cubic modification and Fe2(WO4)3 in the monoclinic modification. A change in the Fe:W molar ratio from 1:1 to 1:3 in the electrolyte due to an increase in the concentration of Na2WO4 leads to an increase in the thickness from 24 to 33 μm, a decrease in the iron concentration from 10 to 4 at.%, but has almost no effect on the tungsten concentration in the oxide layers. According to diffusion reflectance spectra, coatings without iron (TiO2-WO3) absorb only UV light. The presence of iron in coatings leads to a red shift of the spectrum, indicating their ability to absorb visible radiation. This is confirmed by the values of the band gap Eg determined by the Tauc method for direct allowed transitions. As the iron content in the samples decreases, Eg increases from 2.01 to 2.68 eV. For samples obtained in a tetraborate-tungstate electrolyte without iron complexes, Eg=3.0 eV. All obtained composites exhibit almost the same photocatalytic activity in the degradation of methyl orange ((10 mg/L, pH 6.8) in the presence of hydrogen peroxide (C(H2O2) = 10 mmol/L) under UV and visible light. For citation: Budnikova Yu.B., Vasilyeva M.S., Lukiyanchuk I.V. 2 influence of Fe:W ratio in tetraborate electrolyte on characteristics of oxide layers formed on titanium by plasma electrolytic oxidation. ChemChemTech [Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol.]. 2025. V. 68. N 1. P. 79-87. DOI: 10.6060/ivkkt.20256802.7072.

Authors

Publication Details

Journal
IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENIY KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA
Published
2024-12-10
DOI
https://doi.org/10.6060/ivkkt.20256802.7072
Citations
1
Primary Topic
Catalytic Processes in Materials Science
Type
article
Field-Weighted Citation Impact
0.12
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

2 INFLUENCE OF Fe:W RATIO IN TETRABORATE ELECTROLYTE ON CHARACTERISTICS OF OXIDE LAYERS FORMED ON TITANIUM BY PLASMA ELECTROLYTIC OXIDATION

M. S. Vasilyeva, Yu.B. Budnikova, I. V. Lukiyanchuk
1 citations
IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENIY KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA
Catalytic Processes in Materials Science
0.12
article

2 INFLUENCE OF Fe:W RATIO IN TETRABORATE ELECTROLYTE ON CHARACTERISTICS OF OXIDE LAYERS FORMED ON TITANIUM BY PLASMA ELECTROLYTIC OXIDATION

M. S. Vasilyeva, Yu.B. Budnikova, I. V. Lukiyanchuk
article en
1 citations

Abstract

The effect of the concentration of sodium tungstate in a tetraborate electrolyte containing chelate complexes of Fe (III) with EDTA on the composition, optical and photocatalytic properties of Ti/TiO2-WO3-Fe2(WO4)3 film composites formed by a one-stage method of plasma-electrolytic oxidation was studied. The research showed that sodium tungstate additives contribute to the production of high-quality and continuous PEO coatings. According to X-ray Diffraction Analysis (XRD), all formed coatings contain tungsten oxide WO3 in the cubic modification and Fe2(WO4)3 in the monoclinic modification. A change in the Fe:W molar ratio from 1:1 to 1:3 in the electrolyte due to an increase in the concentration of Na2WO4 leads to an increase in the thickness from 24 to 33 μm, a decrease in the iron concentration from 10 to 4 at.%, but has almost no effect on the tungsten concentration in the oxide layers. According to diffusion reflectance spectra, coatings without iron (TiO2-WO3) absorb only UV light. The presence of iron in coatings leads to a red shift of the spectrum, indicating their ability to absorb visible radiation. This is confirmed by the values of the band gap Eg determined by the Tauc method for direct allowed transitions. As the iron content in the samples decreases, Eg increases from 2.01 to 2.68 eV. For samples obtained in a tetraborate-tungstate electrolyte without iron complexes, Eg=3.0 eV. All obtained composites exhibit almost the same photocatalytic activity in the degradation of methyl orange ((10 mg/L, pH 6.8) in the presence of hydrogen peroxide (C(H2O2) = 10 mmol/L) under UV and visible light. For citation: Budnikova Yu.B., Vasilyeva M.S., Lukiyanchuk I.V. 2 influence of Fe:W ratio in tetraborate electrolyte on characteristics of oxide layers formed on titanium by plasma electrolytic oxidation. ChemChemTech [Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol.]. 2025. V. 68. N 1. P. 79-87. DOI: 10.6060/ivkkt.20256802.7072.

IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENIY KHIMIYA KHIMICHESKAYA TEKHNOLOGIYAVol. 68(2)
Clean water and sanitation
Openalex Percentile: Top 57%
Catalytic Processes in Materials Science
0.12
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

2 INFLUENCE OF Fe:W RATIO IN TETRABORATE ELECTROLYTE ON CHARACTERISTICS OF OXIDE LAYERS FORMED ON TITANIUM BY PLASMA ELECTROLYTIC OXIDATION — M. S. Vasilyeva, Yu.B. Budnikova, et al. · IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENIY KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA (2024) | TGRS Research Map | TGRS