Preliminary design of adjustable Guide Vanes for PaTs in Pumped storage applications

Abstract Pumped-Storage Hydropower Plants (PSHPs) are a well-established technology for storing large amounts of energy and enhancing the power systems flexibility. In the framework of Micro and Mini Hydropower, Pumps as Turbines (PaTs) could represent a valid cost-effective solution also for PSHPs. Nonetheless, the lack of a control device could represent a problem, mainly with non-fixed operating conditions. Additionally, PaTs show generally a steep efficiency decrease at part load. Thus, since conventional PaTs do not present adjustable geometries, a preliminary sizing of an adjustable Inlet Guide Vane (IGV), referring to turbine mode, is proposed in this work. The aim of this work is to propose a methodology suitable to modify a baseline PaT introducing an adjustable IGV to perform a high efficient control in terms of flow rate and pressure drop. The machine selected for the proposed study is a centrifugal pump with a specific speed, n q , equal to 16. The adjustable IGV are inserted between the volute cutwater and the impeller by reducing impeller diameter. To obtain an initial solution for the stationary blades row profile, a review of Francis turbines guide vanes design methods is conducted. Finally, a numerical study on the influence of guide vanes number is performed.