Hydrogen‐Sensitive Inks with 4D Printing of a Fiber‐Tip Hydrogen Microsensor

Abstract Optical fiber hydrogen (H 2 ) sensors have garnered attention for avoiding explosion hazards in flammable gas environments. Conventional optical fiber sensors rely on electron beam sputtering and chemical coating for functionalization, but these methods may not achieve precise functionalization of intricate structures. Based on 4D printing principles, an H 2 ‐sensitive ink containing methacrylate groups modified palladium (Pd) nanoparticles (NPs) is reported, with a printing resolution of 200 nm. Then, a fiber‐tip clamped‐beam H 2 sensor is fabricated with the femtosecond (Fs) laser‐induced two‐photon polymerization (TPP) technique. The sensor exhibits compact dimensions and fast responses, only 2.64 s for a 4.0 vol.% H 2 concentration. A high sensitivity of roughly 165 pm % −1 is achieved as the H 2 concentration increases from 0% to 5.5 vol.%. This study demonstrates that H 2 ‐sensitive microstructures can be flexibly achieved by TPP of H 2 ‐sensitive inks, offering a solution for achieving on‐chip direct laser writing of integrated H 2 microsensors.

Authors

Institutions

Publication Details

Journal
Laser & Photonics Review
Published
2024-12-12
DOI
https://doi.org/10.1002/lpor.202400179
Citations
5
Primary Topic
Gas Sensing Nanomaterials and Sensors
Type
article
Field-Weighted Citation Impact
1.04

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Hydrogen‐Sensitive Inks with 4D Printing of a Fiber‐Tip Hydrogen Microsensor

Junle Qu, Mengqiang Zou, Mengjie Zheng, Changrui Liao et al.
5 citations
Laser & Photonics Review
Gas Sensing Nanomaterials and Sensors
1.04
article

Hydrogen‐Sensitive Inks with 4D Printing of a Fiber‐Tip Hydrogen Microsensor

Junle Qu, Mengqiang Zou, Mengjie Zheng, Changrui Liao, Xiaoyu Weng, Cong Zhao, Yiping Wang, Dejun Liu, Liwei Liu, Dezhi Zhu, Famei Wang, Jiabin Huang, Shangben Jiang, Haoqiang Huang, Weijia Bao, Jiajun Guan, Ying Wang
article en
5 citations

Abstract

Abstract Optical fiber hydrogen (H 2 ) sensors have garnered attention for avoiding explosion hazards in flammable gas environments. Conventional optical fiber sensors rely on electron beam sputtering and chemical coating for functionalization, but these methods may not achieve precise functionalization of intricate structures. Based on 4D printing principles, an H 2 ‐sensitive ink containing methacrylate groups modified palladium (Pd) nanoparticles (NPs) is reported, with a printing resolution of 200 nm. Then, a fiber‐tip clamped‐beam H 2 sensor is fabricated with the femtosecond (Fs) laser‐induced two‐photon polymerization (TPP) technique. The sensor exhibits compact dimensions and fast responses, only 2.64 s for a 4.0 vol.% H 2 concentration. A high sensitivity of roughly 165 pm % −1 is achieved as the H 2 concentration increases from 0% to 5.5 vol.%. This study demonstrates that H 2 ‐sensitive microstructures can be flexibly achieved by TPP of H 2 ‐sensitive inks, offering a solution for achieving on‐chip direct laser writing of integrated H 2 microsensors.

Laser & Photonics ReviewVol. 19(6)
Shenzhen University (CN), Ji Hua Laboratory (CN), Peng Cheng Laboratory (CN)
National Natural Science Foundation of China, Natural Science Foundation of Guangdong Province, National Key Research and Development Program of China
Openalex Percentile: Top 22%
Gas Sensing Nanomaterials and Sensors
1.04
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.