An Investigation into the Ti-Nb-Ag Ternary System for Biocompatible Superelastic Alloys

Superelastic metastable β-Ti-Nb alloys are attractive low-modulus materials for use in biomedical implants. The antibacterial properties of silver and its ability to lower the modulus of Ti-Nb-based transforming alloys make it an appealing ternary addition, but the Ti-Nb-Ag system is poorly characterised at present. This study elucidates the microstructure, equilibrium phases, and mechanical behaviour of a systematic series of Ti–24Nb–XAg (X = 0, 2, 6) (at.%) alloys. The mutual solubility of Nb and Ag in Ti overcame the immiscibility of Nb and Ag and produced an alloy with a single-phase β microstructure for low Ag concentrations. However, at silver concentrations above approximately 5 at.%, the solubility limit was reached and precipitates began to form. These precipitates were found to form quickly during recrystallisation, refining the grain size by Zener pinning, and persisted even after a 500 h heat treatment at 1100 °C. All three alloys showed non-linear-elastic behaviour typical of transforming alloys. The addition of up to 2 at.% Ag to Ti–24Nb was found to decrease the elastic modulus, suppress formation of the ω phase, and cause the critical transformation stress to decrease, though the transformation stress increased above that of Ti–24Nb when 6 at.% Ag is added. These results indicate that Ti-Nb-Ag alloys are a promising candidate for developing new low-modulus implants.