A versatile setup for hydrogen isotope permeation studies

The Testbed for Analysis of Permeation of Atoms in Samples (TAPAS) is an experimental setup for ion-driven permeation studies with a focus on investigating wall materials for nuclear fusion devices. A monoenergetic, mass-filtered high-intensity keV ion beam is focused and directed onto the permeation sample by electrostatic ion optics and decelerated to the desired ion energy by a dedicated set of apertures close to the sample. We were able to obtain ion energies as low as 170 eV/D with a D3+ ion beam with an ion flux density of the order of 1020 D/m2s on a beam-wetted area of ∼33 mm2. These conditions avoid sputtering of W targets by the ion beam and are representative of the particle flux and energy spectrum impinging on the first wall of a prospective nuclear fusion power reactor. Permeation samples can be heated up to 1000 K in an ultra-high vacuum. The design of the deceleration system, together with a high pumping speed in the loading chamber, ensures a low pressure of recycling hydrogen isotope molecules in front of the sample. In addition to ion-driven permeation, TAPAS provides a limited capability for gas-driven permeation at low pressures up to nearly 1 mbar. Permeating hydrogen isotopes are detected with a quadrupole mass spectrometer in the downstream ultra-high vacuum chamber. After a detailed description of the setup and calibration procedures for implanted particle flux, mass spectrometer, and neutral gas pressure, benchmark experiments on recrystallized, 50 μm thick tungsten foils are shown, demonstrating that diffusion-limited boundary conditions for permeation were reached.