Optimization of Machining Parameters for Reducing Drum Shape Error Phenomenon in Wire Electrical Discharge Machining Processes

Machining thicker workpieces in the process of Wire Electrical Discharge Machining (WEDM) can result in a concave phenomenon known as a “drum shape error” due to the vibration of wires and accumulation of debris, which leads to secondary discharge in the middle of the workpiece. Reducing the drum shape error typically requires a longer finishing process. Finding a balance between precision and machining time efficiency has become a challenge for modern machining shops. This study employed experimental analysis to investigate the effect of individual parameters on the shape error and machining removal rate (MRR). Key influential parameters, including open voltage (OV), pulse ON time (ON), pulse OFF time (OFF), and servo voltage (SV), were chosen for data collection using full factorial and Taguchi orthogonal arrays. Regression analysis was conducted to establish multiple regression equations. These equations were used to develop optimization rules, and subsequently, a user-friendly human–machine interface was developed using C# based on these optimization rules to create a shape error and MRR optimization system. The system can predict the optimal parameter combinations to minimize the shape error and increase the MRR. The results of the verification experiments showed that the prediction accuracy can reach 94.7% for shape error and 99.2% for MRR. Additionally, the shape error can be minimized by up to 40%.