Application of Mobile Mapping System for a Modern Topography

Abstract The mobile 3D mapping systems (MMS) and the integration with Geographical Information Systems (GIS) represent an innovative and efficient approach to modern topography. It is recommended and useful for infrastructure analysis and urban planning. This modern technology provides accurate, fast, and detailed data, facilitating well-informed decision-making and contributing to the development of sustainable infrastructure in the 21st century. The purpose of this research was to use a mobile mapping system for land surveying measurement of an urban area, independent of pre-established ground control points. On the other hand, the research is supposed to demonstrate the usefulness of kinematic trajectory, digital imaging, and laser scanning in acquiring, storing, and processing point cloud data. This paper shows an affordable method and a modern scanning instrument used for mobile mapping scanning, to create a georeferenced point cloud (PC). The obtained result has centimetric precision of georeferenced point cloud data, even if the average speed of the car was about 30km/h. The trajectory adjustment with static GNSS measurements increases the accuracy of ground control points (GCPs) up to ±5cm for horizontal positioning and vertical positioning. Although this study was carried out while the system was mounted on a car the result followed the national accuracy requirements for land surveying and cadastre fields. In other words, the mobile mapping system is a faster and cost-effective in time alternative to static laser scanning and it is important to continue to explore and adopt these technological solutions to face the future challenges in the field of urban development and infrastructure.