Exploring Forest Vertical Structure With TomoSense: GEDI and SAR Tomography Insights

Exploring vertical forest structures worldwide via remote sensing faces challenges. Recent technologies like waveform light detection and ranging (LiDAR) from NASA’s global ecosystem dynamics investigation (GEDI) and SAR tomography (TomoSAR) from future European Space Agency (ESA) BIOMASS offer promising solutions. This article assesses the performance of spaceborne GEDI and TomoSAR airborne data from an ESA’s TomoSense campaign to highlight the important role of GEDI measurements in BIOMASS algorithm training and establishing precise site-specific processing parameters. Our study in Germany’s Eifel National Park delves into the precision of GEDI and P-band TomoSAR in measuring surface [digital terrain model (DTM)] and vegetation [canopy height model (CHM)] heights. Results demonstrate that GEDI and P-band TomoSAR offer high-resolution and precise surface and vegetation heights and vertical profile measurements. While GEDI relative height (RH) at 98% (RH98) was previously recommended for tropical forests, our findings advocate for RH85 as the optimal metric for temperate forests. The research supports improving the accuracy of both DTM and CHM utilizing GEDI beams with full-power lasers coupled with high sensitivity and signal-to-noise ratio (SNR). Ground elevation measurements are more accurate than canopy height estimates for temperate forests, with DTM RMSE about 2 m and CHM RMSE about 3 m for GEDI and TomoSAR measurements. By analyzing the vertical structure of monthly GEDI data, we note a 1-m shift in the volume peak between GEDI’s leaf-on and leaf-off periods. At the same time, TomoSAR consistently exhibits a lower volume peak by about 2 m compared to GEDI during leaf-on seasons. In conclusion, our research underscores the complementary roles of TomoSAR and GEDI in accurately mapping diverse forest types, thereby bolstering the effectiveness of the BIOMASS mission.