Adhesion of Aluminum Alloy to Tip of Nozzle Plate of Vertical Type High Speed Twin Roll Caster

In a vertical type high-speed twin-roll caster, the adhesion of solidified aluminum alloy to the nozzle (ASAN) makes problems with the quality of the strip surface. The effects of the Si content of Al–Si alloys and the casting conditions on the ASAN were investigated. Alloys with Si contents of 0%, 0.5%, 1%, 2%, 3%, 6% and 10% were considered. The ASAN was high for Si contents of 0.5%, 1%, and 2%. This demonstrates that there is a relationship between the quasi-solid state and the ASAN. As the roll speed and molten metal temperature increased and solidification length decreased, the ASAN decreased. On the basis of these results, the stagnation of molten metal near the nozzle plate was investigated. A gap of 5 mm was introduced between the nozzle plate and the roll surface to eliminate the stagnation of molten metal, resulting in reduction of the ASAN.