Optimization Design and Atomization Performance of a Multi-Disc Centrifugal Nozzle for Unmanned Aerial Vehicle Sprayer

The nozzle is a crucial component in unmanned aerial vehicle (UAV) sprayers. The centrifugal nozzle offers unique advantages; however, there is a scarcity of published research regarding the structural parameters, spraying parameters, and practical applications specifically for UAV spraying. Furthermore, there is a need for UAV-specific nozzles that demonstrate high efficiency and excellent atomization performance. In this present study, a multi-disc centrifugal nozzle (MCN) capable of controlling droplet size was designed and optimized. The droplet size spectra with different atomizing discs were tested, and indoor and field tests were conducted to investigate the atomization and spray deposition characteristics of the MCN. It was found that the MCN with six atomizing discs with a curved groove, a disc angle of 120°, and a disc diameter of 77 mm demonstrated better atomizing performance. The volume median diameter was 96–153 μm, and the relative span was 1.0–1.3. Compared with the conventional hydraulic nozzle, this nozzle increased the effective spray swath width from 2.5–3.0 m to 4.0–5.0 m and promoted the average deposition rate by 132.4% at a flying height of 1.0 m and a flying speed of 3.0 m/s, which tends to raise the operation efficiency by four to five times. This study can provide a reference for the design and optimization of centrifugal nozzles for a UAV sprayer and the selection of operating parameters in aerial spraying operations.