The Influence of the Assembly Unit of CO2-Cured Secondary Aluminum Ash and CO2-Cured Iron Tailings on High Performance Concrete’s Properties

This paper aims to study the influence of the assembly units of CO2-cured iron tailings (IOT) and CO2-cured secondary aluminum ash (SAA) on the fresh high-performance concrete’s (HPC’s) slump flow and setting time. The mechanical properties including the flexural strength, compressive strength, the bonding strength and the dry shrinkage rate of the hardened HPC are measured. The amount of leached Cr and Zn after immersing in deionized water for 1 month~6 months is measured. The influence of the basalt fibers’ volume ratio and the aspect ratio of the high-performance concrete’s performance is considered. The scanning electron microscopy energy spectrums (SEM-EDS) are obtained. The results show that the slump flow and the setting time of fresh HPC are increased by the added CO2-cured SAA and IOT. The fresh HPC with 10% CO2-cured IOT and 20% CO2-cured SAA had the highest slump flow. The slump flow decreases in the form of cubic function with the placing time. The mechanical strengths and the dry shrinkage rate of HPC during the early curing ages (cured for 0.5 day~7 days) are decreased by the CO2-cured SAA and CO2-cured IOT, while the mechanical strengths at later curing ages (14 days~90 days) are increased by the added CO2-cured SAA and CO2-cured IOT. HPC with 10% CO2-cured SAA and 20% CO2-cured IOT shows the highest mechanical strengths. The amount of leached Cr and Zn is decreased by the CO2 cured SAA and IOT. The relationship between the mechanical strengths and the curing time coincides with the cubic equation. The basalt fibers with a volume ratio of 2% and aspect ratio of 1000 show the highest mechanical strengths, the lowest dry shrinkage rate and the least amount of leached Cr and Zn. CO2-cured SAA and IOT can improve the compactness of HPC’s hydration products. HPC with 10% CO2-cured SAA and 20% CO2-cured IOT shows the highest compact hydration products.