Effect of Combining Fungal and Flame-Retardant Coatings on the Thermal Degradation of Spruce and Beech Wood Under Flame Loading

Compliance with fire safety standards for wood is crucial for its application in the internal applications of buildings. This article focuses on monitoring the quality of protective coatings for wood under thermal loading conditions. The examined samples of spruce (Picea abies L. Karst.) and beech wood (Fagus sylvatica L.) were treated with selected fungicidal coatings based on dimethylbenzyl ammonium chloride. Following this, they were soaked in a ferric phosphate-based flame-retardant solution. Additionally, a portion of the samples was treated solely with the flame retardant. The effectiveness of the protective coatings was assessed through experimental thermal loading of the prepared samples. The testing method adhered to according to selected standards, which evaluate the ignitability of building materials when subjected to a small flame source. The experimental results, including the mass loss, mass loss rate, and time–temperature curves of the thermally loaded samples, demonstrated a significant influence of the selected coatings on thermal degradation. Notably, the fungicidal coating exhibited protective properties. Samples treated only with the flame retardant showed higher mass losses compared to those treated first with the fungicidal coating followed by the retardant. Additionally, differences were observed between the wood types, with beech samples exhibiting greater mass losses and higher mass loss rates than spruce.