Intravascular Ultrasound Image-Based Finite Element Modeling Approach for Quantifying <em>In Vivo</em> Mechanical Properties of Human Coronary Artery

Quantifying the mechanical properties of coronary arterial walls could provide meaningful information for the diagnosis, management, and treatment of coronary artery diseases. Since patient-specific coronary samples are not available for patients requiring continuous monitoring, direct experimental testing of vessel material properties becomes impossible. Current coronary models typically use material parameters from available literature, leading to significant mechanical stress/strain calculation errors. Here, we would introduce a finite element model-based updating approach (FEMBUA) to quantify patient-specific in vivo material properties of coronary arteries based on medical images. In vivo cine intravascular ultrasound (IVUS) and virtual histology (VH)-IVUS images of coronary arteries were acquired from a patient with coronary artery disease. Cine IVUS images showing the vascular movement over one cardiac cycle were segmented, and two IVUS frames with maximum and minimum lumen circumferences were selected to represent the coronary geometry under systolic and diastolic pressure conditions, respectively. VH-IVUS image was also segmented to obtain the vessel contours, and a layer thickness of 0.05 cm was added to the VH-IVUS contours to reconstruct the coronary geometry. A computational finite element model was created with an anisotropic Mooney-Rivlin material model used to describe the vessel's mechanical properties and pulsatile blood pressure conditions prescribed to the coronary luminal surface to make it contract and expand. Then, an iterative updating approach was employed to determine the material parameters of the anisotropic Mooney-Rivlin model by matching minimum and maximum lumen circumferences from the computational finite element model with those from cine IVUS images. This image-based finite element model-based updating approach could be successfully extended to determine the material properties of arterial walls in various vascular beds and holds the potential for risk assessment of cardiovascular diseases.