Impact of Dual Phase Lag on Natural Convection Flow in a Porous Vertical Channel in the Presence of Periodic Boundary

ABSTRACT The dual‐phase‐lag (DPL) heat conduction model is utilized in this research to analyze the fluid flow of viscous fluid passing through a porous vertical channel with periodic boundary conditions. Periodic heating is subjected to the channel boundary. Equations regarding the model, including the momentum and energy equations, in which the DPL term is incorporated, all in dimensional form, are stated and are being transformed to their dimensionless form, then solved analytically by undetermined coefficients and variation of parameters. The actual expressions of temperature and velocity, as well as the heat transfer rate and skin friction, are determined. The effects of the DPL parameters, suction/injection, Prandtl number, heat source/sink, and Strouhal number on the dimensionless temperature and velocity profiles are demonstrated using graphs that are constructed with the aid of MATLAB. It was found during the investigation that the introduction of the DPL model, together with suction/injection in the channel, enhances the velocity and fluid temperature within the channel. Also, the decreasing effect of temperature gradient phase lag on fluid temperature and velocity conversed with that of heat flux phase lag. As an important contribution, the discovery of the effects of the phase‐lag parameters of the DPL model and suction/injection on fluid temperature and velocity would significantly help researchers advance the design of electrical and electronic systems.