Life cycle environmental impacts and costs of water electrolysis technologies for green hydrogen production in the future

Abstract Background To limit climate change and reduce further harmful environmental impacts, the reduction and substitution of fossil energy carriers will be the main challenges of the next few decades. During the United Nations Climate Change Conference (COP28), the participants agreed on the beginning of the end of the fossil fuel era. Hydrogen, when produced from renewable energy, can be a substitute for fossil fuel carriers and enable the storage of renewable energy, which could lead to a post-fossil energy age. This paper outlines the environmental impacts and levelized costs of hydrogen production during the life cycle of water electrolysis technologies. Results The environmental impacts and life cycle costs associated with hydrogen production will significantly decrease in the long term (until 2045). For the case of Germany, the worst-case climate change results for 2022 were 27.5 kg CO 2eq. /kg H 2 . Considering technological improvements, electrolysis operation with wind power and a clean heat source, a reduction to 1.33 kg CO 2eq. /kg H 2 can be achieved by 2045 in the best case. The electricity demand of electrolysis technologies is the main contributor to environmental impacts and levelized costs in most of the considered cases. Conclusions A unique combination of possible technological, environmental, and economic developments in the production of green hydrogen up to the year 2045 was presented. Based on a comprehensive literature review, several research gaps, such as a combined comparison of all three technologies by LCA and LCC, were identified, and research questions were posed and answered. Consequently, prospective research should not be limited to one type of water electrolysis but should be carried out with an openness to all three technologies. Furthermore, it has been shown that data from the literature for the LCA and LCC of water electrolysis technologies differ considerably in some cases. Therefore, extensive research into material inventories for plant construction and into the energy and mass balances of plant operation are needed for a corresponding analysis to be conducted. Even for today’s plants, the availability and transparency of the literature data remain low and must be expanded.