On a Specific Method for Characterizing Ion Exchange Membranes to Assess Their Functionality in Salinity Gradient Power Generation Through Reverse Electrodialysis, Including the Effect of Temperature

Salinity gradient power (SGP) by reverse electrodialysis is a promising method for converting SGP into electricity. Instead of the conventional approach of using seawater and freshwater, an alternative method involves using highly concentrated salt solutions (brines) alongside seawater or brackish water. Key factors influencing SGP via reverse electrodialysis (SGP-RE) include the properties of ion exchange membranes, particularly their thickness. This paper outlines a practical experimental set-up that uses both a cation membrane (CM) and an anion membrane (AM). The system is configured with three compartments: two outer compartments filled with highly concentrated brine (HIGH) and a central compartment containing a lower concentration salt solution (LOW), akin to seawater. The compartments are separated by a CM on one side and an AM on the other. The ion transport rate from the HIGH compartments to the central LOW compartment allows for determining the overall ion transport coefficient for thin membranes. Measurements of ion flux and electrochemical voltage under dynamic equilibrium conditions also enable the estimation of the SGP-RE power density (W/m²). By controlling the temperature of the HIGH and LOW solutions, this experiment further investigates the significant impact of temperature on ion transport characteristics.