Experimental Study of a Bionic Porous Media Evaporative Radiator Inspired by Leaf Transpiration: Exploring Energy Change Processes

The performance of photovoltaic (PV) cells is significantly influenced by their operating temperature. While conventional active cooling methods are limited by economic feasibility, passive cooling strategies often face challenges related to insufficient heat dissipation capacity. This study presents a bio-inspired evaporative heat sink, modeled on the transpiration and water transport mechanisms of plant leaves, which leverages porous media flow and heat transfer. The device uses capillary pressure, generated through the evaporation of the cooling medium under sunlight, to maintain continuous coolant flow, thereby achieving effective cooling. An experimental setup was developed to validate the device’s performance under a heat flux density of 1200 W/m2, resulting in a maximum temperature reduction of 5 °C. This study also investigated the effects of porous medium thickness and porosity on thermal performance. The results showed that increasing the thickness of the porous medium reduces cooling efficiency due to reduced fluid flow. In contrast, the effect of porosity was temperature-dependent: at evaporation temperatures below 67 °C, a porosity of 0.4 provided better cooling, while at higher temperatures, a porosity of 0.6 was more effective. These findings confirm the feasibility of the proposed device and provide valuable insights into optimizing porous media properties to enhance the passive cooling of photovoltaic cells.