The Role of LEM in Mine Slope Safety: A Pre- and Post-Blast Perspective

Slopes are formed as a result of mining operations. These slopes are classified as artificial slopes. Improper planning of slopes can lead to instability and potentially trigger landslides. PT. Allied Indo Coal Jaya employs the open-pit mining method in its coal mining operations. Slopes are naturally formed in open-pit mines. Additionally, PT. Allied Indo Coal Jaya utilizes blasting for rock demolition. Therefore, it is crucial to assess the impact of blasting activities on slope stability. This study investigates the influence of blasting on slope stability in coal mines using the limit equilibrium method (LEM). The study evaluates the effects of factors such as ground vibration, blast distance, and blast hole count on the factor of safety (FoS) of slopes. The limit equilibrium method (Fellenius, Bishop, Janbu, Spencer, and Morgenstern-Price) is employed to determine the factor of safety. The factor of safety is modeled using RocScience SLIDE version 6.0 in this study. The factor of safety (FoS) is defined as the ratio of the stabilizing force to the destabilizing force acting on the slope. This study also models the influence of ground vibration, distance, and total number of blast holes on the factor-of-safety (FoS) value. The results indicate that the slope remains stable both pre- and post-blasting, with an overall FoS value greater than 1 for the five slopes examined using various limit equilibrium method (LEM) techniques. However, the FoS value decreased prior to blasting due to the impact of ground vibration and blast distance. It is evident that the ground vibration (PPA) increases with the number of blast holes. The amount of ground vibration decreases as the number of blast holes increases. An increased number of blast holes leads to a decrease in the FoS value. The observed decline in slope FoS values and the increase in PPAs is attributable to the growing number of blast holes. The type of explosive, along with its power and rate of detonation, influences the amount of energy produced, which in turn affects the degree of ground vibration. The findings indicate that the slopes remain stable (FoS > 1) both before and after blasting, although blasting slightly reduces the FoS. The study reveals that as the number of blast holes increases, both ground vibration (PPA) and the reduction in FoS increase, underscoring the effects of explosive power and detonation rate on slope stability.