Optimization design of dead time in the four-switch buck-boost LLC resonant converter

Purpose The purpose of this study is to solve the problem of longer dead-time in the rear bridge leg switches and lower efficiency in the Four-Switch Buck-Boost LLC Resonant Converter. Design/methodology/approach The paper adopts time-domain analysis to derive the time-domain expression for optimal dead time, analyzing the conditions for achieving soft switching of the transistors. It further explores the relationship between the dead time of the bridge arm switching transistors and the input/output of the converter under different operating conditions. Specifically, the dead time of the upper bridge arm transistors increases with the converter input voltage and decreases with the output current. In contrast, the dead time of the lower bridge arm transistors is independent of the converter output current and decreases with increasing converter input voltage. Findings By simulating and constructing a 500 W experimental prototype, experimental results indicate that designing the dead time of the switch according to the optimal dead time proposed in this paper significantly improves efficiency when the converter operates from heavy load to full load. When the transformer takes minimum input, maximum input and intermediate bus voltage inputs respectively, its peak efficiency is increased by 0.6%, 1.7% and 1.1%, respectively, compared to the traditional four-switch Buck–Boost LLC resonant converter. Originality/value Experimental validation confirms the correctness of the optimal dead time design and analyzes the impact of different operating conditions of the converter on the dead time. This is of significant importance for the rational design of switch dead times and the enhancement of converter efficiency.