Gas-compensated thermal flow sensor using an integrated velocity-independent gas properties meter

Abstract A gas-compensated thermal flow sensor is presented that measures the flow rate in real-time, independent of the type of gas, by simultaneously measuring and compensating for the thermal conductivity and volumetric heat capacity of the gas. The thermal flow sensor consists of two free-hanging, heated wires, forming a calorimetric flow meter. The temperature difference between the two wires is a function of the flow rate and the fluid thermal properties. An additional heated wire is integrated on the same chip and used to measure the gas properties. This wire is suspended over a shallow V-groove cavity, and oriented perpendicular to the flow direction, so that it is only affected by the gas properties and not by the flow. DC excitation is used to measure the thermal conductivity, and AC excitation with the 3 ω method is used to determine the volumetric heat capacity. The output of the thermal flow sensor is automatically corrected for the medium using these measured parameters. Measurements were performed with 11 different gases and gas mixtures, and in all cases the deviation between the applied flow rate and measured flow rate is less than 10%.