Experimental Research on Behavior of Spontaneous Imbibition and Displacement After Fracturing in Terrestrial Shale Oil Based on Nuclear Magnetic Resonance Measurements

Spontaneous imbibition (SI) effectively enhances oil recovery in shale reservoirs, significantly changing well shut-in and flowback design. This study conducted SI and displacement experiments to simulate the well shut-in and flowback stages so that the mechanism of imbibition and displacement between crude oil and fracture fluid can be discussed. In addition, the relative contribution to oil recovery of different types of pores in various stages and the effect of wettability were determined with low-field nuclear magnetic resonance (LF-NMR) via each sample’s T2 transverse relaxation time at each time. The experimental results show that shale has multiscale pore structure characteristics combined with micropores, small mesopores, and mesopores. During the SI process, crude oil is displaced from micropores by fracture fluid at first, and then a large amount of oil production comes from small mesopores. Oil recovery of water-wet core samples is approximately 40.7%. Oil recovery of oil-wet core samples is about 26%. The wettability significantly affects the imbibition and displacement oil recovery of samples. For the process of SI, oil recovered from small mesopores takes the lead in the complete sample recovery. For the displacement process, oil recovered from small mesopores and mesopores take the lead in the complete sample recovery. After displacement, only 12% of fracture fluid flooded from the samples. This research, demonstrating the imbibition and displacement characteristics of terrestrial shale and several relevant affecting factors, contributes to understanding the fracturing fluid retention mechanism in shale reservoirs and provides crucial theoretical foundations for the development of shale oil reservoirs.