Low-Overlap Point Cloud Registration via Correspondence Augmentation

Existing works have made some progress in point cloud registration, but most of them measure performance only on point cloud pairs with high overlap. In practical applications, it is often difficult to ensure that the collected point clouds overlap in large regions due to problems such as occlusion and noise. Therefore, a good low-overlap point cloud registration method is of great practical significance. However, extracting reliable correspondences from point clouds has always been a challenging task, particularly when dealing with low-overlap situation. In this paper, we propose a novel method for low-overlap point cloud registration via efficient correspondence augmentation, called AugLPCR, which not only enhances correspondences with high confidence, but also employs confidence weights to mitigate the impact of outliers. After the augmentation, the correspondences used for the transformation have a large amount of inliers, leading to improved registration performance. Extensive experiments on indoor and outdoor datasets demonstrate that the proposed AugLPCR is capable of maintaining consistent performance and achieve results comparable to or better than the state-of-the-art methods. Note to Practitioners—The motivation of this paper is to address the problem of registering two low-overlap point clouds. Mainstream algorithms for point cloud registration typically assume a sufficient overlap between point clouds. However, in practical scenarios, it is common to encounter scans with inadequate overlap. These conditions often hinder the extraction of reliable correspondences. This paper introduces an effective method for augmenting correspondences to address the problem of low inlier rates within predicted correspondences. While augmenting correspondences with high confidence, it also mitigates the influence of outliers and ambiguous points. Additionally, traditional approaches often divide superpoint regions before matching, but this can lead to the elimination of points in overlapping regions alongside outliers. To address this issue, we adjust the order of superpoint matching and region partitioning. The proposed framework can be easily applied to other correspondence-based point cloud registration models.

Authors

Institutions

Publication Details

Journal
IEEE Transactions on Automation Science and Engineering
Published
2024-11-28
DOI
https://doi.org/10.1109/tase.2024.3506120
Citations
5
Primary Topic
Remote Sensing and LiDAR Applications
Type
article
Field-Weighted Citation Impact
1.03

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Low-Overlap Point Cloud Registration via Correspondence Augmentation

Zhi-Huang Lin, Huibin Lin, Guang Zeng, Chun-Yang Zhang et al.
5 citations
IEEE Transactions on Automation Science and Engineering
Remote Sensing and LiDAR Applications
1.03
article

Low-Overlap Point Cloud Registration via Correspondence Augmentation

Zhi-Huang Lin, Huibin Lin, Guang Zeng, Chun-Yang Zhang, Xiangyang Lin, C. L. Philip Chen
article en
5 citations

Abstract

Existing works have made some progress in point cloud registration, but most of them measure performance only on point cloud pairs with high overlap. In practical applications, it is often difficult to ensure that the collected point clouds overlap in large regions due to problems such as occlusion and noise. Therefore, a good low-overlap point cloud registration method is of great practical significance. However, extracting reliable correspondences from point clouds has always been a challenging task, particularly when dealing with low-overlap situation. In this paper, we propose a novel method for low-overlap point cloud registration via efficient correspondence augmentation, called AugLPCR, which not only enhances correspondences with high confidence, but also employs confidence weights to mitigate the impact of outliers. After the augmentation, the correspondences used for the transformation have a large amount of inliers, leading to improved registration performance. Extensive experiments on indoor and outdoor datasets demonstrate that the proposed AugLPCR is capable of maintaining consistent performance and achieve results comparable to or better than the state-of-the-art methods. Note to Practitioners—The motivation of this paper is to address the problem of registering two low-overlap point clouds. Mainstream algorithms for point cloud registration typically assume a sufficient overlap between point clouds. However, in practical scenarios, it is common to encounter scans with inadequate overlap. These conditions often hinder the extraction of reliable correspondences. This paper introduces an effective method for augmenting correspondences to address the problem of low inlier rates within predicted correspondences. While augmenting correspondences with high confidence, it also mitigates the influence of outliers and ambiguous points. Additionally, traditional approaches often divide superpoint regions before matching, but this can lead to the elimination of points in overlapping regions alongside outliers. To address this issue, we adjust the order of superpoint matching and region partitioning. The proposed framework can be easily applied to other correspondence-based point cloud registration models.

IEEE Transactions on Automation Science and EngineeringVol. 22
Fuzhou University (CN), South China University of Technology (CN)
National Natural Science Foundation of China
Openalex Percentile: Top 26%
Remote Sensing and LiDAR Applications
1.03
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.