Polycyclic aromatic hydrocarbons formed during the pyrolysis of dimethoxymethane (DMM). Comparison with other oxygenated additives

• The high yield to gases reduces the formation of soot and PAH during the pyrolysis of DMC and DMM. • The highest formation of soot and PAH occurs from the pyrolysis of furans and alcohols at 1475 K. • Light PAH, such as NAPH and ACNY, were found in greater amounts for all pyrolyzed compounds. • The parameter B[ a ]P-eq shows the highest value for the pyrolysis of 2,5DMF and the lowest value for DMM. The influence of the temperature (1075 – 1475 K) and inlet concentration of fuel (33,333 and 50,000 ppmv) on the formation of the 16 EPA-priority Polycyclic Aromatic Hydrocarbons (PAH) from the pyrolysis of dimethoxymethane (DMM) was analyzed. PAH were detected in different phases (gas phase, adsorbed on soot, and stuck on the reactor walls) and quantified by gas chromatography-mass spectrometry (GC–MS). Additionally, the toxicity of the PAH samples, expressed as B[ a ]P-eq, was analyzed in all experiments. A comparison with the results obtained from the pyrolysis of other oxygenated compounds was also performed and similar behaviors were observed. The main results showed that, at low temperatures, the highest concentrations of PAH were found in the gas phase, while at high temperatures were found on soot. For both inlet concentrations of DMM, the light PAH, such as naphthalene and acenaphthylene, were found in major concentrations, in all phases and temperatures. The heavy PAH, such as fluoranthene and pyrene, increased its concentration on soot at highest temperatures. The highest formation of soot was obtained at 1475 K and follows the trend: 2,5DMF < tert -butanol < 2MF < 2butanol < iso -butanol < 1-butanol < ethanol < DMC < DMM. The highest formation of PAH was at 1275 K with the tendency: tert -butanol < 2-butanol < 1-butanol < 2,5DMF < 2MF < iso -butanol < ethanol < DMC < DMM. The highest B[ a ]P-eq value was found in the pyrolysis of 2,5DMF, and the lowest in the pyrolysis of DMM.

Authors

Institutions

Publication Details

Journal
Fuel
Published
2024-11-27
DOI
https://doi.org/10.1016/j.fuel.2024.133750
Citations
1
Primary Topic
Advanced Combustion Engine Technologies
Type
article
Field-Weighted Citation Impact
0.22

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Polycyclic aromatic hydrocarbons formed during the pyrolysis of dimethoxymethane (DMM). Comparison with other oxygenated additives

María U. Alzueta, Fausto Viteri, Katiuska Alexandrino, Rafael Bilbao et al.
1 citations
Fuel
Advanced Combustion Engine Technologies
0.22
article

Polycyclic aromatic hydrocarbons formed during the pyrolysis of dimethoxymethane (DMM). Comparison with other oxygenated additives

María U. Alzueta, Fausto Viteri, Katiuska Alexandrino, Rafael Bilbao, Ángela Millera
article en
1 citations

Abstract

• The high yield to gases reduces the formation of soot and PAH during the pyrolysis of DMC and DMM. • The highest formation of soot and PAH occurs from the pyrolysis of furans and alcohols at 1475 K. • Light PAH, such as NAPH and ACNY, were found in greater amounts for all pyrolyzed compounds. • The parameter B[ a ]P-eq shows the highest value for the pyrolysis of 2,5DMF and the lowest value for DMM. The influence of the temperature (1075 – 1475 K) and inlet concentration of fuel (33,333 and 50,000 ppmv) on the formation of the 16 EPA-priority Polycyclic Aromatic Hydrocarbons (PAH) from the pyrolysis of dimethoxymethane (DMM) was analyzed. PAH were detected in different phases (gas phase, adsorbed on soot, and stuck on the reactor walls) and quantified by gas chromatography-mass spectrometry (GC–MS). Additionally, the toxicity of the PAH samples, expressed as B[ a ]P-eq, was analyzed in all experiments. A comparison with the results obtained from the pyrolysis of other oxygenated compounds was also performed and similar behaviors were observed. The main results showed that, at low temperatures, the highest concentrations of PAH were found in the gas phase, while at high temperatures were found on soot. For both inlet concentrations of DMM, the light PAH, such as naphthalene and acenaphthylene, were found in major concentrations, in all phases and temperatures. The heavy PAH, such as fluoranthene and pyrene, increased its concentration on soot at highest temperatures. The highest formation of soot was obtained at 1475 K and follows the trend: 2,5DMF < tert -butanol < 2MF < 2butanol < iso -butanol < 1-butanol < ethanol < DMC < DMM. The highest formation of PAH was at 1275 K with the tendency: tert -butanol < 2-butanol < 1-butanol < 2,5DMF < 2MF < iso -butanol < ethanol < DMC < DMM. The highest B[ a ]P-eq value was found in the pyrolysis of 2,5DMF, and the lowest in the pyrolysis of DMM.

FuelVol. 383
Universidad de Zaragoza (ES)
Ministerio de Ciencia, Innovación y Universidades, Ministerio de Economía y Competitividad, Secretaría de Educación Superior, Ciencia, Tecnología e Innovación, Gobierno de Aragón, European Regional Development Fund
Clean water and sanitation
Openalex Percentile: Top 53%
Advanced Combustion Engine Technologies
0.22
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.