Effectiveness of the VFSMOD Model in Simulating Sediment Trapping by a Vegetative Filter Strip: Case of the Lobo Reservoir in Daloa (Central–West Côte d’Ivoire)

The Lobo reservoir, designed to supply water to the Daloa city population (central west of Côte d’Ivoire), is facing the phenomenon of eutrophication due to the agricultural plots located upstream of the reservoir inputs. Studies have highlighted the reservoir pollution and sedimentation problems. This study was initiated to test the effectiveness of a transfer model in the fight against the eutrophication problem. The objective of this study was to determine the optimal width of a vegetative filter strip on the banks of the Lobo reservoir, where the water intake installations of the drunk water company SODECI are located, using the VFSMOD model. The methodological approach is structured into four (4) main stages: 1—Evaluation of runoff from the source of pollution (contributing surface) during a rainy episode; 2—Calculation of the incoming runoff volume and the sediment load; 3—Simulation of runoff reduction and incoming sediments within the grassy filter strip; and 4—Determination of the optimal width of the grassy strip. The results obtained showed a contributing source area of 13.5 ha and 2% as the average slope. A runoff volume of 4680 m3 coming from the source of pollution is reduced by 1119 m3 (24%) through a grassy strip that is 3 m wide. The sediment load goes from 132 kg to 33 kg, a reduction of 75% in the quantity of sediment entering. The scenarios tested showed that a grassy strip width equal to 3 m should allow for a reduction of 75% of upstream sediments. This grassy strip width of 3 m should be considered for implementing a vegetative filter strip around the Lobo reservoir.