The Impact of Drained Conditions on Deformation Behaviors of Saturated Clay under Intermittent Cyclic Loading

Cyclic triaxial tests with intermittent cyclic loading are usually used to investigate the deformation behaviors of soil; however, both deviator stress and confining pressure vary cyclically under traffic loading. Moreover, the pore water in soil can be dissipated throughout the test, affecting the mechanical behaviors of soils. Therefore, in this study, three test modes were applied to saturated soft clay to analyze the deformation behaviors, in which different cyclic confining pressures were used during cyclic loading periods, and different drained conditions during cyclic loading and intermittent periods were considered. The variations in strain increment were similar in all cases: as the loading stages progressed, the strain increment gradually diminished. The distinct variation in strain increment became evident in the initial loading stage, but it became negligible in subsequent loading stages. Furthermore, the change in strain increment with respect to cyclic confining pressure was influenced by drained conditions during the cyclic loading period: it increases as the cyclic confining pressure increased under partially drained conditions and decreases under undrained conditions. Moreover, the strain increased under partially drained conditions during intermittent periods, companying with the discharge of pore water, while it decreased for the recovery of specimen deformation under undrained conditions. The greater strain increment was caused under partially drained conditions during cyclic loading periods compared with the corresponding strain increment under undrained conditions. Besides, an empirical model was developed to forecast accumulated axial strain of soil subjected to intermittent cyclic loading, and the variations of parameters under different drained conditions were studied.