Improving Solar PV System Performance with DC-DC Converters with MPPT Technique in Real-Time Simulation

A Photo Voltaic (PV) system turns Solar Energy (SE) into electricity that needs efficient converter topology. One significant obstacle associated with solar systems is the fluctuation in energy production from solar PV modules due to meteorological factors like temperature and irradiance. The advancement of Maximum Power Point Tracking (MPPT) algorithms has enhanced the effectiveness of solar panels. Implementing an effective operational control approach may optimize the performance of PV panels, while utilizing proper semiconductor materials can maximize the efficiency of converters. This work introduces a MPPT method based on Perturb and Observe (P&O) algorithm. The PV system performs with optimal efficiency when it is near the IV curve, where it produces the highest amount of electricity due to its non-linear voltage-current characteristics. The power output is determined by the degree of irradiance and the temperature of the cells, resulting in the maximum achievable power output. The conditions vary according on the season, time of day, and environmental factors. Rapid variations in light can occur due to factors like clouds. Thus, it is imperative to precisely monitor the maximum power point (MPP) in all settings to optimize power generation. This study proposes a method to optimize the power output of a PV system by integrating MPPT with a DC-DC energy converter. This approach ensures that the PV generator operates at its maximum power level, irrespective of external factors such as sunshine intensity and temperature. MPPT algorithms exhibit variations in their implementation and performance, with a range of MPPT control algorithms being accessible. The P&O algorithms are widely used due to their ability to regulate the MPP of PV panels. The method is validated in real-time using Typhoon Hill Simulation.