Investigation of Wettability, Thermal Stability, and Solar Behavior of Composite Films Based on Thermoplastic Polyurethane and Barium Titanate Nanoparticles

Herein, composite films were produced by incorporating different amounts (1, 3, 5, and 7%) of barium titanate nanoparticles into the thermoplastic polyurethane matrix using a solution casting method. This study examined the impact of the presence and concentration of a barium titanate additive on morphologic properties, mechanical performance, thermal stability, solar behavior, and wettability of produced film samples. The films were characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, thermal gravimetric analysis, scanning electron microscope, ultraviolet-visible near-infrared spectrophotometer, water contact angle, and tensile strength measurements. In the present study, the mass loss of samples containing 7% barium titanate was 24% lower than that of the pure polyurethane reference. The increase of barium titanate rate added to polyurethane enhanced the solar reflectance property of the films, including the near-infrared region. As a prominent result, the transmittance value decreased significantly compared to the reference in the ultraviolet region, and it dropped to 3% for the highest additive concentration. The contact angle values of polyurethane films increased by 11-40% depending on the barium titanate addition ratio. The nano additive also positively affected the mechanical performance of the reference polyurethane film by slightly increasing the tensile strength values.