Causes and Evolution of High Injection–Production Ratios in Low-Permeability Reservoirs: The Role of Water Absorption in Barrier and Intercalated Layers

During the waterflood development of low-permeability reservoirs, the lithology of barrier and intercalated layers adjacent to the reservoir, with specific permeability and porosity, has a significant impact on water injection efficiency and reservoir energy recovery. However, current research on injection–production parameters and pressure changes in low-permeability reservoirs has not fully considered the effect of these barrier layers. Therefore, this study focuses on the Chaoyanggou Oilfield, a typical low-permeability reservoir, aiming to reveal the influence of water absorption by barrier layers on water injection efficiency and pressure changes in the reservoir. The study systematically analyzes the evolution of the injection–production ratio at different development stages by constructing a comprehensive lithological geological model and applying numerical simulation methods. It explores how the water absorption characteristics of barrier layers affect reservoir pressure and injection efficiency. The results demonstrate that argillaceous siltstone and silty mudstone have significant water absorption effects on injected water, critically influencing pressure distribution and fluid flow dynamics in the reservoir. As the water cut increases, the injection–production ratio gradually stabilizes, and the elastic water storage in the reservoir becomes crucial for establishing an effective oil displacement system. The water absorption of barrier layers accounts for 30% to 40% of the injected water. A high injection–production ratio alone does not lead to rapid energy recovery or increased production. Only by balancing the injection–production ratio, reservoir pressure, and water absorption in barrier layers can the efficiency and recovery rate of waterflood development in low-permeability reservoirs be further improved.