Centrifugal Test Study on the Vertical Uplift Capacity of Single-Cylinder Foundation in High-Sensitivity Marine Soil

Offshore wind power is a new type of clean energy with broad development prospects. Accurate analysis of the uplift capacity of offshore wind turbine foundations is a crucial prerequisite for ensuring the safe operation of wind turbines under complex hydrodynamic conditions. However, current research on the uplift capacity of suction caissons often neglects the high-sensitivity characteristics of marine soils. Therefore, this paper first employs the freeze–thaw cycling procedure to prepare high-sensitivity saturated clay. Subsequently, a single−tube foundation for wind turbines is constructed within a centrifuge through a penetration approach. Ten sets of centrifuge model tests with vertical cyclic pullout are conducted. Through comparative analysis, this study explores the pullout capacity and its variation patterns of suction caisson foundations in clay with different sensitivities under cyclic loading. This research indicates the following: (1) The preparation of high-sensitivity soil through the freeze−thaw procedure is reliable; (2) the uplift capacity of suction caissons in high−sensitivity soil rapidly decreases with increasing numbers of cyclic loads and then tends to stabilize. The cumulative displacement rate of suction caissons in high-sensitivity soil is fast, and the total number of pressure–pullout cycles required to reach non-cumulative displacement is significantly smaller than that in low-sensitivity soil; (3) the vertical cyclic loading times and stiffness evolution patterns of single-tube foundations, considering the influence of sensitivity, have been analyzed. It was found that the secant stiffness exhibits a logarithmic function relationship with both the number of cycles and sensitivity. The findings of this study provide assistance and support for the design of suction caissons in high-sensitivity soils.