Hydroxyapatite Nanocoatings Deposited by Means of Resonant Matrix-Assisted Pulsed Laser Evaporation

Hydroxyapatite (HAp) is one of the most widely studied materials for utilization in the development of artificial implants. Research is mainly aimed at the production and modification of HAp coatings for simplification of the deposition process, cost reduction, and increase in biocompatibility. In this paper, the authors deposited HAp synthetic microparticles by means of matrix-assisted pulsed laser evaporation (MAPLE) on Ti6Al4V alloy plate substrates and obtained uniform HAp coatings without further treatment or modifications. The authors utilized a tunable pulsed laser to adjust its wavelength to the selected solvents, in order to optimize the process for deposition speed and quality. The following solvents were used as matrices: deionized water, isopropyl alcohol, and a 3:2 mixture of isopropanol:acetonitrile. Obtained coatings were examined by means of scanning electron microscopy, Raman spectroscopy, X-ray diffraction, and profilometry in order to evaluate coating quality, uniformity, and structural integrity. MAPLE deposition allowed the acquisition of approx. 200 nm thick coatings for water and isopropanol matrices and approx. 320 nm for isopropanol:acetonitrile matrix, which indicates an increase in deposition rate by 37%. The obtained coatings meet requirements for further biocompatibility testing, material modification, and composite synthesis.