Classifications and scaling of generic shaped, steady and unsteady water bells formed by a jet impinging onto a vial

We present the results of a combined experimental and theoretical investigation of different fluid sheet structures formed during the impingement of a laminar liquid jet on a vial, with a slightly larger diameter than the jet and filled with the same liquid. The present set-up produces all diverse fluid sheet structures, unlike previous experiments that required a deflector disk resulting in no-slip and no-penetration boundary conditions. The water sheet structures are classified into four regimes; regime I: pre-sheet; regime II: puffing, characterized by the periodic formation and destruction of the upward-rising water sheet, an interesting observation not reported earlier; regime III, steady upward, inverted umbrella-like sheet structures; and regime IV, the formation of downward, umbrella-like sheet structures, which can be either open or closed, classically referred to as ‘water bells’. The water sheet structures observed are governed by the non-dimensional parameters: the ratio of vial diameter to the jet diameter at impact ( $X$ ), the capillary number ( $Ca$ ), the Weber number ( $We$ ) and the Froude number ( $Fr$ ). The parametric spaces $X-Ca$ , $X-We$ and $X-Fr$ exhibit the demarcation of the four regimes. A semi-empirical expression for the ejection angle of the liquid sheet, primarily responsible for different shapes, is derived in a control volume that provides a theoretical basis for the identified regime diagrams. The puffing water bells in regime II are found to be quasi-steady as the experimental trajectories are in good agreement with the steady-state theory. The rise time of puffing water bells that determines the puffing frequency has been modelled.