Borehole Optical Fibre Distributed Temperature Sensing vs. Manual Temperature Logging for Geothermal Condition Assessment: Results of the OptiSGE Project

Geothermal energy is a crucial component contributing to the development of local thermal energy systems as a carbon-neutral and reliable energy source. Insights into its availability derive from knowledge of geology, hydrogeology and the thermal regime of the subsurface. This expertise helps to locate and monitor geothermal installations as well as observe diverse aspects of natural and man-made thermal effects. Temperature measurements were performed in hydrogeological boreholes in south-western Poland using two methods, i.e., manual temperature logging and optical fibre distributed temperature sensing (OF DTS). It was assumed the water column in each borehole was under thermodynamic equilibrium with the local geothermal gradient of the subsurface, meaning rocks and aquifers. Most of the acquired results show typical patterns, with the upper part of the log depending on altitude, weather and climate as well as on seasonal temperature changes. For deeper parts, the temperature normally increases depending on the local geothermal gradient. The temperature logs for some boreholes located in urban agglomerations showed anthropogenic influence caused by the presence of infrastructure, the urban heat island effect, post-mining activities, etc. The presented research methods are suitable for applications connected with studies crucial to selecting the locations of geothermal installations and to optimize their technical parameters. The observations also help to identify zones of intensified groundwater flow, groundwater inrush into wells, fractured and fissured zones and many others.