Knitted Microwave Transmission Line for Wearable Electronics

This paper introduces a novel approach to fabricating textile microwave transmission lines through knitting techniques. These textile-based transmission lines, capable of transmitting high-frequency signals between wearable transceivers and antennas, offer significant potential for the development of advanced wearable electronics. By leveraging a single technological process, our proposed method enables the creation of flexible and wearable devices. To demonstrate the feasibility of this approach, we present the design and numerical modeling of a microstrip line operating within the gigahertz frequency range. A prototype structure was fabricated and experimentally characterized, revealing moderate attenuation of less than 5 dB for frequencies below 2.5 GHz. However, a major challenge in the field of wearable electronics is the real-time applicability of such devices. Our work aims to address this challenge by providing a flexible and scalable solution for integrating wireless communication capabilities into wearable systems. Future research will focus on further optimizing the design and fabrication processes to enhance performance and minimize signal loss, ultimately enabling the realization of practical and user-friendly wearable devices.