Experimental study of combustion and emissions characteristics of low blend ratio of 2-methylfuran/ 2-methyltetrahyrofuran with gasoline in a DISI engine

• First study to compare low blend ratio MF20 and MTHF20 with neat ULG in a DISI engine. • MTHF20 exhibits improved specific fuel consumption over MF20 across all load conditions. • MTHF20 achieves the highest thermal efficiency at most mid-range loads. • Unburned furan emissions from MF20 and MTHF20 accounted for only 3 % of total HC at 280 °CA BTDC. The nearing depletion of fossil fuels and the possible consequences of its emissions on the global climate has prompted a worldwide probe for their alternatives. 2-methylfuran and 2-methyltetrahydrofuran are considered promising alternative fuels for spark ignition engines. In this study, the combustion and emission characteristics of low blending ratio MF20 (2-methylfuran 20 %, gasoline 80 % by volume) and MTHF20 (2-methyltetrahydrofuran 20 %, gasoline 80 % by volume) were first implemented and compared to neat gasoline in a single-cylinder direct injection spark ignition engine. The combustion performance of the test fuels was analyzed across a range of loads from 3.5 to 8.5 bar indicated mean effective pressure and fuel injection timings between 180 and 280 crank angle degrees before top dead center. Meanwhile, the compositions of the hydrocarbon emissions were experimentally investigated using the Fourier Transform Infrared Spectroscopy technique. Results show that MF20 exhibits advanced spark timing flexibility of 8 and 7 crank angle degrees before top dead center compared to the unleaded gasoline and MTHF20 respectively at the peak load. MTHF20 exhibits the highest maximum cylinder pressure at medium load compared to other fuels but drops sharply at peak load accompany with the audible knock. Additionally, MTHF20 exhibits specific fuel consumption advantage over MF20 across the entire load range. The unburned furan of the total hydrocarbon emissions was recorded to be 3 % of total hydrocarbon emissions. The concept of low blending ratio furan-based fuel proposed could provide a solution for the transition period of carbon neutrality.

Authors

Institutions

Publication Details

Journal
Fuel
Published
2024-11-22
DOI
https://doi.org/10.1016/j.fuel.2024.133799
Citations
5
Primary Topic
Catalysis for Biomass Conversion
Type
article
Field-Weighted Citation Impact
0.92

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Experimental study of combustion and emissions characteristics of low blend ratio of 2-methylfuran/ 2-methyltetrahyrofuran with gasoline in a DISI engine

Gengxin Zhang, Hongming Xu, Xiao Ma, Haoye Liu et al.
5 citations
Fuel
Catalysis for Biomass Conversion
0.92
article

Experimental study of combustion and emissions characteristics of low blend ratio of 2-methylfuran/ 2-methyltetrahyrofuran with gasoline in a DISI engine

Gengxin Zhang, Hongming Xu, Xiao Ma, Haoye Liu, Rafiu K. Olalere
article en
5 citations

Abstract

• First study to compare low blend ratio MF20 and MTHF20 with neat ULG in a DISI engine. • MTHF20 exhibits improved specific fuel consumption over MF20 across all load conditions. • MTHF20 achieves the highest thermal efficiency at most mid-range loads. • Unburned furan emissions from MF20 and MTHF20 accounted for only 3 % of total HC at 280 °CA BTDC. The nearing depletion of fossil fuels and the possible consequences of its emissions on the global climate has prompted a worldwide probe for their alternatives. 2-methylfuran and 2-methyltetrahydrofuran are considered promising alternative fuels for spark ignition engines. In this study, the combustion and emission characteristics of low blending ratio MF20 (2-methylfuran 20 %, gasoline 80 % by volume) and MTHF20 (2-methyltetrahydrofuran 20 %, gasoline 80 % by volume) were first implemented and compared to neat gasoline in a single-cylinder direct injection spark ignition engine. The combustion performance of the test fuels was analyzed across a range of loads from 3.5 to 8.5 bar indicated mean effective pressure and fuel injection timings between 180 and 280 crank angle degrees before top dead center. Meanwhile, the compositions of the hydrocarbon emissions were experimentally investigated using the Fourier Transform Infrared Spectroscopy technique. Results show that MF20 exhibits advanced spark timing flexibility of 8 and 7 crank angle degrees before top dead center compared to the unleaded gasoline and MTHF20 respectively at the peak load. MTHF20 exhibits the highest maximum cylinder pressure at medium load compared to other fuels but drops sharply at peak load accompany with the audible knock. Additionally, MTHF20 exhibits specific fuel consumption advantage over MF20 across the entire load range. The unburned furan of the total hydrocarbon emissions was recorded to be 3 % of total hydrocarbon emissions. The concept of low blending ratio furan-based fuel proposed could provide a solution for the transition period of carbon neutrality.

FuelVol. 382
Lagos State University (NG), Tianjin University (CN), University of Lagos (NG), University of Birmingham (GB), Tsinghua University (CN)
Engineering and Physical Sciences Research Council
Affordable and clean energy
Openalex Percentile: Top 27%
Catalysis for Biomass Conversion
0.92
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.