High electromechanical coupling factor Lamb wave resonator

Lamb wave resonators (LWRs) based on lithium niobate on insulator (LNOI) substrates operating in an A1 mode at frequencies above 5 GHz typically exhibit high electromechanical coupling coefficients (K2) ranging from 20% to 30%. This makes them promising candidates to replace current bulk acoustic wave technology in next-generation broadband RF filters. However, the K2 of conventional LWRs still struggles to meet application requirements for bandwidths exceeding 1 GHz, such as WiFi-6E. This paper presents an analytical optimization approach for rapid and comprehensive scanning of the full 3D Euler space to find the maximum effective K2 of LWR devices. Such a full scan is difficult to achieve by the conventional time-consuming finite element method (FEM). The K2 results for a selected subset of Euler angles obtained through this analytical approach align with FEM simulation results. The optimized results show that LWRs on LNOI can achieve the highest K2 of 59.92% at Euler angles of (0, −151°, −60°), providing bandwidths exceeding 1 GHz at 5 GHz. To validate this optimization approach, LWRs with various orientations were fabricated on both 41° YX-cut and Z-cut LNOI wafers, with measured K2 values at different Euler angles agreeing well with both analytical and FEM results. The proposed K2 optimization method serves as a valuable guideline for selecting substrate cuts and device orientations in the design of ultra-broadband filters for next-generation telecommunications.