Convenient synthesis of granulated Li/Al-layered double hydroxides/chitosan composite adsorbents for lithium extraction from simulated brine with a high Mg2+/Li+ ratio

• A novel Li/Al-LDH/chitosan composite hydrogel granule (CLDH) was prepared. • The granulation of Li/Al-LDH does not require the use of organic solvents . • The maximum adsorption capacity of Li + on CLDH-3 is 12.5 mg g −1 in simulated brine. • CLDH-3 shows good reusability and selectivity in extracting Li + from brine. Lithium/aluminum layered double hydroxides (LDH) have been industrially applied to extract lithium from salt-lake brine. Different from traditional granulation methods, chitosan with high hydrophilicity was used as the binder of LDH in this work, and LDH/chitosan composite hydrogel granules (CLDH) with a diameter of about 1–2 mm were successfully prepared. The new granulation method is simple, cost-effective, and does not require the use of organic solvents. The chemical composition and structure of CLDH were characterized by techniques such as FTIR, XRD, FESEM, TEM, TGA, and XPS. In simulated brine with a Mg 2+ /Li + ratio of 102, the maximum saturated adsorption capacity of lithium on CLDH-3 reached 12.5 mg g −1 (pH = 6.5), but it took 24 h to reach adsorption equilibrium. During the three successive cycles for the extraction of Li + from simulated brine by the CLDH-3 column at the flow rate of 1 mL min −1 , the adsorption capacities of Li + on CLDH-3 in the three cycles were 15.4, 15.9 and 12.1 mg g −1 , respectively. Moreover, deionized water (30 °C) was used as the eluent to recover lithium adsorbed on the CLDH-3 column, and the lithium recovery efficiencies reached 50.7 %, 53.6 %, and 62.8 % of the column adsorption capacities over the three cycles, respectively, and the Mg/Li ratios in the eluents were 0.47, 0.71, and 0.50, respectively. Overall, CLDH-3 exhibits good reusability, mechanical strength, structural stability, and selectivity in the process of lithium extraction from simulated salt-lake brine, and has potential industrial application value.

Authors

Institutions

Publication Details

Journal
Chemical Engineering Journal
Published
2024-11-19
DOI
https://doi.org/10.1016/j.cej.2024.157780
Citations
22
Primary Topic
Extraction and Separation Processes
Type
article
Field-Weighted Citation Impact
4.68

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Convenient synthesis of granulated Li/Al-layered double hydroxides/chitosan composite adsorbents for lithium extraction from simulated brine with a high Mg2+/Li+ ratio

Keyi Liu, Yuefa Gong, Wei Qi, Xin Liu et al.
22 citations
Chemical Engineering Journal
Extraction and Separation Processes
4.68
article

Convenient synthesis of granulated Li/Al-layered double hydroxides/chitosan composite adsorbents for lithium extraction from simulated brine with a high Mg2+/Li+ ratio

Keyi Liu, Yuefa Gong, Wei Qi, Xin Liu, Hong Peng, Xiaojie Zhang, Liqin Zhao
article en
22 citations

Abstract

• A novel Li/Al-LDH/chitosan composite hydrogel granule (CLDH) was prepared. • The granulation of Li/Al-LDH does not require the use of organic solvents . • The maximum adsorption capacity of Li + on CLDH-3 is 12.5 mg g −1 in simulated brine. • CLDH-3 shows good reusability and selectivity in extracting Li + from brine. Lithium/aluminum layered double hydroxides (LDH) have been industrially applied to extract lithium from salt-lake brine. Different from traditional granulation methods, chitosan with high hydrophilicity was used as the binder of LDH in this work, and LDH/chitosan composite hydrogel granules (CLDH) with a diameter of about 1–2 mm were successfully prepared. The new granulation method is simple, cost-effective, and does not require the use of organic solvents. The chemical composition and structure of CLDH were characterized by techniques such as FTIR, XRD, FESEM, TEM, TGA, and XPS. In simulated brine with a Mg 2+ /Li + ratio of 102, the maximum saturated adsorption capacity of lithium on CLDH-3 reached 12.5 mg g −1 (pH = 6.5), but it took 24 h to reach adsorption equilibrium. During the three successive cycles for the extraction of Li + from simulated brine by the CLDH-3 column at the flow rate of 1 mL min −1 , the adsorption capacities of Li + on CLDH-3 in the three cycles were 15.4, 15.9 and 12.1 mg g −1 , respectively. Moreover, deionized water (30 °C) was used as the eluent to recover lithium adsorbed on the CLDH-3 column, and the lithium recovery efficiencies reached 50.7 %, 53.6 %, and 62.8 % of the column adsorption capacities over the three cycles, respectively, and the Mg/Li ratios in the eluents were 0.47, 0.71, and 0.50, respectively. Overall, CLDH-3 exhibits good reusability, mechanical strength, structural stability, and selectivity in the process of lithium extraction from simulated salt-lake brine, and has potential industrial application value.

Chemical Engineering JournalVol. 501
Ministry of Education (RO)
Huazhong University of Science and Technology, Fundamental Research Funds for the Central Universities
Openalex Percentile: Top 4%
Extraction and Separation Processes
4.68
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.