Effects of Postweld Heat Treatment on Interfacial Behavior and Mechanical Properties of Joints Welded with Cu/Ni-Cr Alloy

Welded cable composed of nickel-chromium (Ni-Cr) alloy and copper is a crucial component in the resistance heating technology used for heavy oil production. Tungsten inert gas (TIG) welding was employed to join the copper and Ni-Cr alloy using copper filler wire, and the stability of the welded joint was analyzed under high-temperature service conditions. We examined the changes in the microstructure and properties of the welded joint after postweld heat treatment (PWHT) at 600 °C for 3, 6, and 12 days. The results showed that the welded joint was appropriately formed, with fractures occurring in the copper substrate. The average tensile strength of the welded joint was 240 MPa. The copper and nickel dissolved into each other, forming a Cu_0.81Ni_0.19 strengthening phase. A columnar crystal diffusion layer formed at the interface between the Ni-Cr alloy and the fusion zone after welding. Grain boundary migration promoted the continuous growth in the columnar crystals as the PWHT duration increased, eliminating the microdefects and inhomogeneities caused by welding. The microhardness progressively decreased from the Ni-Cr alloy side to the copper side. However, the nanoindentation results at the Ni-Cr fusion line initially decreased and then increased with increasing PWHT duration, which contrasted the overall hardness trend observed across the joint after PWHT.