Modal analysis of concrete gravity dam incorporating pre-stress condition along with soil–structure interaction

Purpose The fundamental period of the structure plays an important role in the seismic analysis. This study aims to analyze the modal response of dam, the two-dimensional (2D) FEM model is developed by using ANSYS 2022 R1 software. Design/methodology/approach To examine the optimized mesh size to achieve grid independence, the variable element size has been considered, and its optimal value is calculated using the technique of response surface optimization. Further, the effect of damping ratios of 5%, 8% and 10% is also considered for the free vibration analysis of the dam structure. Findings The results show that the natural frequencies of the dam decrease with a reduction in stiffness of the whole structure. Further, the effect of pre-stress conditions is analyzed and the study has proved that the natural frequency increases after considering the pre-stress as initial condition during modal analysis. Further, it is found that the damping has a substantial effect on frequency for higher modes of vibrations. Research limitations/implications The study only focused on modal analysis of the gravity dam, and this study’s results can be used further to evaluate the dynamic behavior of the dam including hydrodynamic conditions. Originality/value The finite element tool is used to evaluate the modal response of gravity dam incorporating pre-stress and damping ratio along with soil–structure interaction. Moreover, to the best of the authors’ knowledge, no earlier study has been conducted to evaluate the effect of damping and pre-stress conditions on the stability and natural frequency of the system.