Gain characteristics of In0.60Ga0.40As/In0.53Al0.20Ga0.27As superlattice active regions for vertical-cavity surface-emitting lasers

The results of investigation of the gain properties of 1300 nm vertical-cavity surface-emitting lasers active regions based on In0.60Ga0.40As/In0.53Al0.20Ga0.27As superlattices and threshold characteristics comparison of superlattices and highly lattice mismatched In0,74Al0,16Ga0,10As quantum wells are presented. The heterostructure of injection lasers with an In0.60Ga0.40As/In0.53Al0.20Ga0.27As superlattice was grown by molecular beam epitaxy. Mesa structure of injection lasers was obtained by selective liquid etching followed by the application of ohmic contacts. The formation of injection lasers with various cavity lengths is performed using the method of manually cleaving mirrors. The output characteristics were measured in a pulsed mode using a large area calibrated germanium photodiode. Spectral characteristics were measured using a spectrophotometer based on monochromator. The achieved threshold characteristics (modal gain about 40 cm–1, transparency current density about 650 A/cm2, internal optical losses about 8 cm–1) of injection lasers based on In0.60Ga0.40As/In0.53Al0.20Ga0.27As superlattices with low lattice mismatch InGaAs layers are comparable to previously presented lasers based on active regions with strongly strained In0,74Al0,16Ga0,10As quantum wells. The characteristic temperatures T0 and T1 were 60 K and 87 K for injection lasers with a cavity length of 1 mm. An increase in the frequency of small-signal modulation of vertical-cavity surface-emitting lasers and their temperature stability is associated with the use of highly strained In0.60Ga0.40As/In0.53Al0.20Ga0.27As superlattices. The proposed active regions based on InGaAs-InP superlattices have the potential to be used in the development of vertical-cavity surface-emitting lasers in the 1300 nm spectral range. The findings of this work can be applied in the realization of experimental species and optimization of modulation parameters for vertical-cavity lasers operating in the 1300 nm wavelength range.

Authors

Publication Details

Journal
Scientific and technical journal of information technologies mechanics and optics
Published
2024-10-01
DOI
https://doi.org/10.17586/2226-1494-2024-24-5-709-716
Primary Topic
Semiconductor Lasers and Optical Devices
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Gain characteristics of In0.60Ga0.40As/In0.53Al0.20Ga0.27As superlattice active regions for vertical-cavity surface-emitting lasers

V. V. Andryushkin, M. S. Sobolev, P.E. Kopytov, I. I. Novikov et al.
Scientific and technical journal of information technologies mechanics and optics
Semiconductor Lasers and Optical Devices
article

Gain characteristics of In0.60Ga0.40As/In0.53Al0.20Ga0.27As superlattice active regions for vertical-cavity surface-emitting lasers

V. V. Andryushkin, M. S. Sobolev, P.E. Kopytov, I. I. Novikov, M. V. Maximov, L. Ya. Karachinsky, A. Yu. Egorov, A. V. Babichev, Yu. M. Shernyakov, N. A. Pikhtin, E. V. Pirogov, Si-Cong Tian, A. V. Lyutetskiy
article en

Abstract

The results of investigation of the gain properties of 1300 nm vertical-cavity surface-emitting lasers active regions based on In0.60Ga0.40As/In0.53Al0.20Ga0.27As superlattices and threshold characteristics comparison of superlattices and highly lattice mismatched In0,74Al0,16Ga0,10As quantum wells are presented. The heterostructure of injection lasers with an In0.60Ga0.40As/In0.53Al0.20Ga0.27As superlattice was grown by molecular beam epitaxy. Mesa structure of injection lasers was obtained by selective liquid etching followed by the application of ohmic contacts. The formation of injection lasers with various cavity lengths is performed using the method of manually cleaving mirrors. The output characteristics were measured in a pulsed mode using a large area calibrated germanium photodiode. Spectral characteristics were measured using a spectrophotometer based on monochromator. The achieved threshold characteristics (modal gain about 40 cm–1, transparency current density about 650 A/cm2, internal optical losses about 8 cm–1) of injection lasers based on In0.60Ga0.40As/In0.53Al0.20Ga0.27As superlattices with low lattice mismatch InGaAs layers are comparable to previously presented lasers based on active regions with strongly strained In0,74Al0,16Ga0,10As quantum wells. The characteristic temperatures T0 and T1 were 60 K and 87 K for injection lasers with a cavity length of 1 mm. An increase in the frequency of small-signal modulation of vertical-cavity surface-emitting lasers and their temperature stability is associated with the use of highly strained In0.60Ga0.40As/In0.53Al0.20Ga0.27As superlattices. The proposed active regions based on InGaAs-InP superlattices have the potential to be used in the development of vertical-cavity surface-emitting lasers in the 1300 nm spectral range. The findings of this work can be applied in the realization of experimental species and optimization of modulation parameters for vertical-cavity lasers operating in the 1300 nm wavelength range.

Scientific and technical journal of information technologies mechanics and opticsVol. 24(5)
Ministry of Science and Higher Education of the Russian Federation
Affordable and clean energy
Openalex Percentile: Top 82%
Semiconductor Lasers and Optical Devices
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.