Analysis of Relay Coordination in Electrical Distribution Networks with Optimally Positioned Distributed Generation Units

As power demand increases and transmission and distribution capacity is limited, Distributed Generation (DG) units are gradually being incorporated into electrical power distribution networks. However, this integration may result in a significant impact on the coordination of protective relays, potentially generating issues such as blindness of protection and false tripping of overcurrent relays. To overcome these issues, an adaptive protection method is presented that adjusts relay sensitivity in response to changes in network design. The suggested technique dynamically modifies relay settings based on the line current, which fluctuates depending on the system design. Digital relays are needed for this method in order to save operational data in real time. Based on periodic observations, the Plug Multiplier Setting (PMS) and Time Multiplier Setting (TMS) parameters are optimized using a Fuzzy Inference System (FIS). Fuzzy rules are used by the adaptive algorithm for every relay. These rules are produced using the fuzzy editor using the inputs provided. An initial investigation was carried out to evaluate the effect of DG on the coordination of relay protection., as well as the optimal placement of DG to reduce losses and improve voltage profiles, using two base distribution networks. The algorithm was further tested on various configurations of IEEE distribution networks, and its effectiveness in achieving optimal relay coordination with adaptive settings was validated through the relay coordination module in ETAP.