Substrate induced composition change during Ge2Sb2Te5 atomic layer deposition and study of initial reactions on SiO2 surface

Ge2Sb2Te5 (GST) is a well-known phase change material used in nonvolatile memory devices, photonics, and nonvolatile displays. This study investigates the impact of precursor sequence during atomic layer deposition (ALD) of GST from GeCl2.C4H8O2, SbCl3, and Te[(CH3)3Si]2 on Si/SiO2 substrates, focusing on growth per cycle, morphology, and composition along with initial precursor reactions on the substrate. We found that while thick layers approach stoichiometric Ge2Sb2Te5, a Ge-rich interfacial layer is initially formed, regardless of the binary ALD sequence used to start the deposition (GeTe vs Sb2Te3). Starting the ALD process with the GeTe-Sb2Te3 sequence results in a higher Ge content near the GST/SiO2 interface compared to the Sb2Te3-GeTe sequence. To understand these phenomena, we examine the initial precursor reactions on the SiO2 substrate by total reflection x-ray fluorescence spectrometry. The analysis reveals that SbCl3 exhibits lower reactivity with the SiO2 substrate than GeCl2.C4H8O2, and not all Ge adspecies react with the Te[(CH3)3Si]2 precursors. Additionally, the impact of the initial SiO2 surface on deposition extends over several ALD cycles, as the SiO2 surface only gradually gets covered by GST due to island growth. These processes contribute to the formation of a Ge-rich GST layer at the interface, irrespective of the precursor pulse sequence. These insights from the study may contribute to optimizing the initial deposition stages of GST and other ternary ALD processes to enable better composition control and enhanced device performance.