Investigating secondary ice production in a deep convective cloud with a 3D bin microphysics model: Part II - Effects on the cloud formation and development

Secondary ice production (SIP) leads to the formation of new ice particles from preexisting ones. Besides generating ice crystals, SIP can also influence cloud characteristics, including convection, precipitation, and even radiative properties. This study examines the effect of ice crystal formation by Hallett-Mossop, fragmentation of freezing drops, and fragmentation due to ice–ice collision processes in an idealized deep convective cloud observed during the HAIC/HIWC campaign, using the 3D bin microphysics scheme DESCAM. Our results indicate that heterogeneous ice nucleation and fragmentation of freezing drops play a role during the early formation of the cloud while after that, Hallett-Mossop and ice-ice breakup processes dominate, representing 17.6 % and 81.5 % of the ice crystal production, for temperatures warmer than −30°C. For temperatures colder than −30°C, homogeneous and heterogeneous ice nucleation processes are the main contributors to ice crystal formation. The impact of each SIP process on particle size distributions is analyzed by tracking air parcel trajectories. This study also shows the effect of SIP processes on cloud development. Implementing SIP results in a decrease in cloud top altitude by around 1.5 km. Our analysis shows that this effect is caused by increased latent heat released below 11 km, resulting from a stronger vapor deposition on more numerous ice crystals. This enhances convection at lower levels but inhibits it above. Furthermore, incorporating SIP leads to 15 % decrease in total precipitation amount and 25 % reduction of intense rainfall (accumulated precipitation over 40 mm). Hence, our study emphasizes the importance of SIP mechanisms in cloud development and precipitation. • Heterogeneous ice nucleation and fragmentation of freezing drops plays a role during formation of the cloud • Hallett-Mossop and ice-ice breakup processes dominate after the cloud formation • The impact of each SIP process on particle size distributions is analyzed by tracking air parcel trajectories • SIP reduces precipitation amount • SIP affects cloud dynamics, leading to a reduction in cloud top height.

Authors

Institutions

Publication Details

Journal
Atmospheric Research
Published
2024-11-15
DOI
https://doi.org/10.1016/j.atmosres.2024.107797
Citations
5
Primary Topic
Atmospheric aerosols and clouds
Type
article
Field-Weighted Citation Impact
1.41

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Investigating secondary ice production in a deep convective cloud with a 3D bin microphysics model: Part II - Effects on the cloud formation and development

Frédéric Tridon, Céline Planche, Wolfram Wobrock, Pierre Grzegorczyk et al.
5 citations
Atmospheric Research
Atmospheric aerosols and clouds
1.41
article

Investigating secondary ice production in a deep convective cloud with a 3D bin microphysics model: Part II - Effects on the cloud formation and development

Frédéric Tridon, Céline Planche, Wolfram Wobrock, Pierre Grzegorczyk, Antoine Canzi, Laurence Niquet
article en
5 citations

Abstract

Secondary ice production (SIP) leads to the formation of new ice particles from preexisting ones. Besides generating ice crystals, SIP can also influence cloud characteristics, including convection, precipitation, and even radiative properties. This study examines the effect of ice crystal formation by Hallett-Mossop, fragmentation of freezing drops, and fragmentation due to ice–ice collision processes in an idealized deep convective cloud observed during the HAIC/HIWC campaign, using the 3D bin microphysics scheme DESCAM. Our results indicate that heterogeneous ice nucleation and fragmentation of freezing drops play a role during the early formation of the cloud while after that, Hallett-Mossop and ice-ice breakup processes dominate, representing 17.6 % and 81.5 % of the ice crystal production, for temperatures warmer than −30°C. For temperatures colder than −30°C, homogeneous and heterogeneous ice nucleation processes are the main contributors to ice crystal formation. The impact of each SIP process on particle size distributions is analyzed by tracking air parcel trajectories. This study also shows the effect of SIP processes on cloud development. Implementing SIP results in a decrease in cloud top altitude by around 1.5 km. Our analysis shows that this effect is caused by increased latent heat released below 11 km, resulting from a stronger vapor deposition on more numerous ice crystals. This enhances convection at lower levels but inhibits it above. Furthermore, incorporating SIP leads to 15 % decrease in total precipitation amount and 25 % reduction of intense rainfall (accumulated precipitation over 40 mm). Hence, our study emphasizes the importance of SIP mechanisms in cloud development and precipitation. • Heterogeneous ice nucleation and fragmentation of freezing drops plays a role during formation of the cloud • Hallett-Mossop and ice-ice breakup processes dominate after the cloud formation • The impact of each SIP process on particle size distributions is analyzed by tracking air parcel trajectories • SIP reduces precipitation amount • SIP affects cloud dynamics, leading to a reduction in cloud top height.

Atmospheric ResearchVol. 314
Centre National de la Recherche Scientifique (FR), Politecnico di Torino (IT), Institut Universitaire de France (FR), Université Clermont Auvergne (FR), Laboratoire de Météorologie Physique (FR)
Agence Nationale de la Recherche
Climate action
Openalex Percentile: Top 19%
Atmospheric aerosols and clouds
1.41
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.