Microwave Propagation in Circular Quarter Wave Transformer made of Teflon and K-12 Composite

Introduction: The business is developing at an extremely quick rate and the prerequisite for the recently made material is generally there for the high-recurrence applications. There are different polymers and clay materials and there are composites currently accessible in the business for high-recurrence applications. Polymer ceramic composites are being used for high frequency applications. The quarter-wave transformer offers a relatively simple method of impedance matching for many RF applications. Low loss circular quarter wave transformer is important for the circular microwave devices like phase shifters antennas etc which is realizable using Fused silica and K12 polymer ceramic composites. Objectives: Objective of this research work is simulation and fabrication of the circular quarter wave transformer at X-band using TEFLON-K-12 polymer ceramic composites. Methods: The Teflon and K-12 composite was used to fabricate the circular Quater wave transformer for microwave applications. The composite slab was machined to create the bare circular rod. The bare quarter wave transformer was sputtered in a closed chamber in the silver target. The sputtered rod creates a circular Quater wave transformer that is filled with Teflon-K-12 composite. Results: The insertion loss of the circular Quater wave transformer was found 0.05 dB. Thus, a circular Quater wave transformer is formed with polymer and ceramic composite a new material for low loss microwave applications. The practical value holds good in agreement with the theoretical approaches. Conclusions: The Teflon and K-12 composite was used to fabricate the circular Quater wave transformer for microwave applications. The measured S –parameter results of the circular Quater wave transformer were found satisfactory, and it is found suitable for the low loss microwave propagation. The quarter wave transformer is able to match impedances 50 ohms and 100 ohms.